- English
- 日本語
Iron and steel industry/Metal material
- Electronic component/Electronic device
- Piping component/Piping material
- Raw material/Material
- Machine tool/Processing machine/Molding machine/Peripheral equipment
- Hydraulic equipment/Pneumatic equipment/Water pressure equipment
- Pump
- Transporting machine/Conveyance machine/Supply distribution material/Related product
- Industrial machine
- Plant ancillary equipment, environmental equipment
All From 103 1 - 80 items are displayed
-
Shaped Steel Processing Machine Unit Worker "UWD-45III/70III
- NEW
- Catalogue
- Distributor required
- Partnership required
The "UWD-45III" and "UWD-70III" are Shaped Steel Processing Machines for cutting, punching, and notching angles, C-purlins, and flat bars. Two types of machines are selectable according to the material to be processed and the applied pressure. Both types are equipped with an easy-to-read, easy-to-operate LCD panel, allowing even first-time users to handle the machine easily, safely, and reliably. Features Reduced openings at the workpiece loading and unloading ports for higher safety. Easy-to-understand input operation with LCD panel. Selection from 450 kN (UWD-45III) and 700 kN (UWD-70III) according to the applied pressure. NC sizing device for high-speed, high-precision positioning High power for stainless steel processing (UWD-70III) ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Automotive Parts Machine Parts Iron and steel industry/Metal material
-
TOSMICRON® （Super fine music wire with High Strength）
- Catalogue
Music wires for super small springs. “TOSMICRON” has the smallest diameter and strongest tensile in the world.
Target industry: Iron and steel industry/Metal material Metallic Products/Parts Electrical/Electronic Parts
-
Super fine wires from special material
- Catalogue
We supply various material wires based on your requirements. Please contact us for your better products.
Target industry: Iron and steel industry/Metal material Metallic Products/Parts Electrical/Electronic Parts
-
Shaped fine wires
- Catalogue
We can supply several shapes wires
Target industry: Iron and steel industry/Metal material Metallic Products/Parts Electrical/Electronic Parts
-
Universal Type Expansion Joint
- Catalogue
- Distributor required
Two bellows are connected, and the eccentric performance is large; structure prevents stretching caused by stress at the tie rod.
Target industry: Iron and steel industry/Metal material
-
Standard Double Type Expansion Joint
- Catalogue
- Distributor required
Two bellows are connected, allowing for a larger movement than single types.
Target industry: Iron and steel industry/Metal material
-
Pressure-resistant Ring Expansion Joint
- Catalogue
- Distributor required
A pressure-resistant ring is attached to the bellows valley in order to support piping with high pressure.
Target industry: Iron and steel industry/Metal material
-
Outer Cylinder Type Expansion Joint
- Catalogue
- Distributor required
Structure that wraps around the bellows with an inner cylinder and an outer cylinder, making it difficult to buckle even during large expansions and contractions.
Target industry: Iron and steel industry/Metal material
-
Compact Type Light Joints
- Catalogue
- Distributor required
Structure that welds the bellows to the inside of the flange; lightweight and can be manufactured between short faces.
Target industry: Iron and steel industry/Metal material
-
Superjoint for Exhaust Gas
- Catalogue
- Distributor required
Structure that flares the bellows at the flange end face without welding for assembly; can be manufactured between short faces.
Target industry: Iron and steel industry/Metal material
-
NK-6900 High-function Type Expansion Joint
- Catalogue
- Distributor required
Free-form expansion offering high kinematic performance; equipped with HF (water-pressure molding) bellows as standard.
Target industry: Iron and steel industry/Metal material
-
Standard Free Type Expansion Joint
- Catalogue
- Distributor required
Standard structure in which the end pipe is welded to a bellows.
Target industry: Iron and steel industry/Metal material
-
NK-RB-D Spherical Flexible PTFE Lining
- Catalogue
- Distributor required
Fluororesin wetted portion Excellent heat and chemical resistance, and has water and oil repellent characteristics, and non-adhesive properties.
Target industry: Iron and steel industry/Metal material
-
NK-RB-F Spherical Flexible Rubber Joint
- Catalogue
- Distributor required
Excellent anti-vibration effects and pressure resistance; compliant with Ministry of Land, Infrastructure, Transport and Tourism for anti-vibration joints.
Target industry: Iron and steel industry/Metal material
-
Flexible Hose for LP Gas
- Catalogue
- Distributor required
Used to absorb equipment vibration and pipe mounting errors in the piping of liquefied petroleum gas (LPG) high-pressure sections in the axial, perpendicular direction.
Target industry: Iron and steel industry/Metal material
-
NK-1400 Pipe End Type Flexible Hose
- Catalogue
- Distributor required
[Features] ■ Steel pipes are welded to the tubes ■ The inner and outer pipes are completely airtight and maintain pressure resistance, chemical resistance, and combustibility. ■ Ideal for conveying fluids while maintaining a constant temperature ■ Immediate delivery is possible thanks to an extensive stock.
Target industry: Iron and steel industry/Metal material
-
NK-HPG High-pressure Gas Safety Act Compliant Flexible Hose
- Catalogue
- Distributor required
The High-pressure Gas Safety Act regulates the production, storage, sale, movement and other handling and consumption of high-pressure gas, and the manufacture and handling of containers, and promotes voluntary activities by private business operators and high-pressure gas safety associations concerning the safety of high-pressure gas, in order to prevent disasters caused by high-pressure gas, thereby ensuring public safety. Furthermore, in the case of flexible metal hoses, only manufacturers who have obtained the "welding method" can undergo strict witness inspections conducted by the High Pressure Gas Safety Institute of Japan. Only products that have passed the inspection are allowed to be used in piping.
Target industry: Iron and steel industry/Metal material
-
NK-6000 Jacket Type Flexible Hose
- Catalogue
- Distributor required
Double structure consisting of inner and outer pipes; can be manufactured with flange joints, threaded joints, and other joints.
Target industry: Iron and steel industry/Metal material
-
NK-FJ-S Sanitary Flange Type Fluororesin Flexible Hose
- Catalogue
- Distributor required
Sanitary flange (ferrule) at both ends; flexible portion is fluororesin.
Target industry: Iron and steel industry/Metal material
-
NK-FJ-C Female Union Type Fluororesin Flexible Hose
- Catalogue
- Distributor required
Flexible portion is fluororesin; both ends are female unions.
Target industry: Iron and steel industry/Metal material
-
NK-FJ- B Male Union Type Fluororesin Flexible Hose
- Catalogue
- Distributor required
Flexible portion is fluororesin; both ends are male unions.
Target industry: Iron and steel industry/Metal material
-
NK-FJ-A Nipple Type Fluororesin Flexible Hose
- Catalogue
- Distributor required
Fixed male screws at both ends; flexible portion is fluororesin.
Target industry: Iron and steel industry/Metal material
-
NK-FJ-F Flange Type Fluororesin Flexible Hose
- Catalogue
Loose flange at both ends; wetted portion is fluororesin.
Target industry: Iron and steel industry/Metal material
-
NK-2300V JIS Vacuum Flange Type Flexible Hose
- Catalogue
- Distributor required
Flanges composed of a JIS flange VG-VF are welded and mounted.
Target industry: Iron and steel industry/Metal material
-
NK-2300KF KF Flange Type Vacuum Flexible Hose
- Catalogue
- Distributor required
KF flanges are welded and mounted at both ends.
Target industry: Iron and steel industry/Metal material
-
NK-2300PT Pipe End Type Vacuum Flexible Hose
- Catalogue
- Distributor required
Both ends have a pipe end structure; can be connected to a bite-type pipe fitting.
Target industry: Iron and steel industry/Metal material
-
NK-3600 One-touch Coupler Type Flexible Hose
- Catalogue
- Distributor required
Both ends have a one-touch coupler (with valve mechanism); suitable for pipes that are frequently attached and detached.
Target industry: Iron and steel industry/Metal material
-
NK-3500 Lever Coupling Type Flexible Hose
- Catalogue
- Distributor required
Both ends have lever couplings so this is suitable for filling from a storage tank to a mobile tank. [Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals. ■ Immediate delivery is possible thanks to an extensive stock.
Target industry: Iron and steel industry/Metal material
-
NK-1800 Sanitary Flange (Ferrule) Type Flexible Hose
- Catalogue
- Distributor required
Standard type flanges are welded to the tubes. The SNT type has no clearance on the inner face; the structure has few flange and tube steps, making it flexible and lightweight; high-performance product
Target industry: Iron and steel industry/Metal material
-
NK-7800 Pump Joint Flexible Hose
- Catalogue
- Distributor required
Flange not welded for assembly; wetted portion is SUS316L having a unique two-layer bellows; highly durable.
Target industry: Iron and steel industry/Metal material
-
NK-6300 Flange Type (Unwelded) Flexible Hose
- Catalogue
- Distributor required
Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! [Features] ■ Ministry of Land, Infrastructure, Transport and Tourism Specifications ■ Labor saving and absorbs vibrations in plumbing work ■ The connection is stainless steel so this can be used for fluids such as water, steam, oils, and air and the like. ■ RoHS Compliant ■ The inner and outer pipes are completely airtight and maintain pressure resistance, chemical resistance, and combustibility. ■ Ideal for conveying fluids while maintaining a constant temperature
Target industry: Iron and steel industry/Metal material
-
NK-5500 NK-5600 Flange Type (Ribbon Stopper) Flexible Hose
- Catalogue
- Distributor required
Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! Flanges are mounted by welding lap joints and pipes to the tubes. Structure fully demonstrated pressure resistance of the wire blade; supports long lengths.
Target industry: Iron and steel industry/Metal material
-
NK-5000 NK-5100 Flange Type (Band Stopper) Flexible Hose
- Catalogue
- Distributor required
[Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals.
Target industry: Iron and steel industry/Metal material
-
NK-4000 NK-4100 Flange Type (Ribbon Blade) Flexible Hose
- Catalogue
- Distributor required
[Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals.
Target industry: Iron and steel industry/Metal material
-
NK-3300 Flange Type (Unwelded) Flexible Hose
- Distributor required
[Features] ■ Ministry of Land, Infrastructure, Transport and Tourism Specifications ■ Labor saving and absorbs vibrations in plumbing work ■ The connection is stainless steel so this can be used for fluids such as water, steam, oils, and air and the like. ■ RoHS Compliant ■ Maximum working pressure: 1 MPa (at room temperature) ■ Maximum operating temperature: 300°C (450°C for SUS304 flange material)
Target industry: Iron and steel industry/Metal material
-
NK-3100 Standard Flange Type Flexible Hose
- Catalogue
- Distributor required
Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! [Features] ■ Ministry of Land, Infrastructure, Transport and Tourism Specifications ■ Labor saving and absorbs vibrations in plumbing work ■ RoHS Compliant ■ The inner and outer pipes are completely airtight and maintain pressure resistance, chemical resistance, and combustibility. ■ Ideal for conveying fluids while maintaining a constant temperature
Target industry: Iron and steel industry/Metal material
-
NK-2500 NK-2600 General Purpose Flange Type Flexible Hose
- Catalogue
- Distributor required
Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! [Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals. ■ Immediate delivery is possible thanks to an extensive stock.
Target industry: Iron and steel industry/Metal material
-
NK-3400 Light Union Type (Unwelded) Flexible Hose
- Catalogue
- Distributor required
Structure in which a flexible, specialized lightweight male union and a female union are crimped to one side of a tube.
Target industry: Iron and steel industry/Metal material
-
NK-2000 Slim Union Type (Metal Touch) Flexible Hose
- Catalogue
- Distributor required
Structure in which a slim union (male sheet) is welded to a tube. [Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals.
Target industry: Iron and steel industry/Metal material
-
NK-1900 Union-Nipple Type Flexible Hose
- Catalogue
- Distributor required
Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! [Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals. ■ Immediate delivery is possible thanks to an extensive stock.
Target industry: Iron and steel industry/Metal material
-
NK-1500 Male Union Type Flexible Hose
- Catalogue
- Distributor required
Structure in which a male nipple (R) is welded to a tube. Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! High Quality, Low Price, Short Delivery Time
Target industry: Iron and steel industry/Metal material
-
NK-1300 Female Socket Type Flexible Hose
- Catalogue
- Distributor required
Structure in which a female socket (RC) is welded to a tube. Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! High Quality, Low Price, Short Delivery Time
Target industry: Iron and steel industry/Metal material
-
NK-1200 Multipurpose Union Type Flexible Hose
- Catalogue
- Distributor required
Structure in which a union joint is assembled using NFK’s unique crimping method. Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! High Quality, Low Price, Short Delivery Time
Target industry: Iron and steel industry/Metal material
-
NK-1100 Fit Union Type Flexible Hose
- Catalogue
- Distributor required
Structure with union fittings at both ends. Union fittings can be separated, so plumbing is easy with this product. Stainless steel is used for tube parts, and because welding is not used for the assembly of the tube and fittings, corrosion resistance is excellent. Union fittings can be selected from FCMB (ZN plating) or SUS304. Can be used according to the usage conditions. [Features] ■ Excellent heat resistance, pressure resistance, seismic resistance, flexible motion, and the like. ■ Can be used in all types of piping systems, from gases such as air, steam, and other to liquid conveyance such as water, oils, and chemicals.
Target industry: Iron and steel industry/Metal material
-
NK-1000 Standard Union Model Flexible Hose
- Catalogue
- Distributor required
A structure in which a union joint is mounted by welding a union collar to a tube. Can also be made at our factory in Vietnam so the cost is reduced and the delivery time is shortened compared to shipping from Japan! High Quality, Low Price, Short Delivery Time
Target industry: Iron and steel industry/Metal material
-
Silver flake / Silver Nano Particle
- Catalogue
Manufactures single crystal silver filler using a unique process. An breakthrough silver filler that realizes both flake handling and nanoparticle properties.
Target industry: Iron and steel industry/Metal material Semiconductors/LCD/FPD
-
Probe card pins, Straight pins, and Straight bars
- Catalogue
【Probe card pins】 ・High precision pins used for semiconductor inspection Material：W, Re-W, Pd alloy and so on Diameter：0.05㎜～0.70㎜ Length：25㎜～150㎜ 【Straight pins and Straight bars】 ・High precision straight pins and High precision straight bars Various straight bars for Swiss Machine Straight Pins and Bars for automotive and Medical field Pins for Contact probe, Spring probe, and wire probe Material：W, Re-W, Pd alloy, Stainless steel, Powder high speed steel and so on Diameter：0.025㎜～2.0㎜ Length：3㎜～3000㎜
Target industry: Iron and steel industry/Metal material Industrial Machinery/Devices
-
Technologies for achieving TOKUSEN products
- Catalogue
Manufacture and sales of steel cord and bead wire for automobile tires and various types of shaped wire, piano wire, and other special metal wire
Target industry: Iron and steel industry/Metal material Automotive Parts
-
Extra fine wire, Extra fine shaped wire
- Catalogue
【Extra fine wire for springs】 Extra fine wire with high tensile 【Polishing wire】 Extra precision wire (D +/-0.0003) 【Extra fine shaped wire】 Extra fine,and High precision shaped wire for various applications
Target industry: Iron and steel industry/Metal material Metallic Products/Parts
-
Expansion joint
- Catalogue
- Distributor required
- Partnership required
NK-6500 standard free style expansion joint (fixed flange di kedua sisi/set bolt) NK-6600 standard free style expansion joint (fixed flange di kedua sisi) NK-6700 standard free style expansion joint (pipe end) NK-6900 high function type expansion joint (fixed flange di kedua sisi) NK-7300 super joint untuk exhaust gas (loose flange di kedua sisi) NK-7900 compact type light joint (fixed flange di kedua sisi) NK-7500 external cover type expansion joint (single bellows) NK-7700 external cover type expansion joint (double bellows) NK-7000 pressure resistance ring type expansion joint (single bellows) NK-7100 pressure resistance ring type expansion joint (double bellows) NK-6800 standard double type expansion joint (double bellows) NK-7400 universal type expansion joint (double bellows)
Target industry: Industrial Machinery/Devices Iron and steel industry/Metal material Energy
-
Flexible hose lainnya
- Catalogue
- Distributor required
- Partnership required
NK-6000 jacket type flexible hose NK-1400 pipe end type flexible hose NK-HPG flexible hose yang memenuhi syarat untuk tindakan UU keamanan pada gas tekanan tinggi (KHKS0803) NK-JLP flexible hose untuk LP gas (JLPA209-2010) NK-RB-F flexible joint terbuat dari rubber bulat NK-RB-D flexi PTFE lining terbuat dari rubber bulat NK-JB-F non metallic flexible hose
Target industry: Resin/Plastic/Rubber Products Iron and steel industry/Metal material Construction
-
Special function type expansion joint
- Catalogue
- Distributor required
- Partnership required
NK-8600 straight pipe pressure balance type expansion joint NK-8700 bend pipe pressure balance type expansion joint NK-8300 hinge type expansion joint NK-8400 gimbal type expansion joint NK-10000 angle bellows expansion joint NK-8900 non-metalic expansion joint
Target industry: Iron and steel industry/Metal material Energy Electricity/Gas/Water
-
NK-4000 / NK-4100 : Selang Fleksibel Tipe Flensa (Tipe Slate Braid)
- Catalogue
- Distributor required
- Partnership required
Merupakan selang logam fleksibel tipe slate braid model flensa yang tahan terhadap panas, tekanan, getaran dan geraknya fleksibel. [Fitur] NK-4000 Tipe dengan flensa longgar pada satu sisinya dan flensa fiks pada sisi lainnya. Pemuaiannya lebih sedikit dibandingkan tipe braid kawat. [Fitur] NK-4100 Tipe dengan flensa longgar pada kedua sisinya dan braid pelat. Dapat untuk 2 jenis tube.
Target industry: Iron and steel industry/Metal material Energy Electricity/Gas/Water
-
NK-JB-F : Selang Fleksibel Non-metalik
- Catalogue
- Distributor required
- Partnership required
Merupakan selang fleksibel non-metalik alias bellows, dan merupakan produk yang dijahit dengan kain khusus atau resin. Dibandingkan dengan selang fleksibel yang terbuat dari logam, keleluasaannya lebih tinggi, jenis bahan gabungannya lebih beragam dan dapat diolah menjadi bermacam-macam bentuk. Memiliki kekedapan udara pada tekanan rendah dan tahan terhadap suhu tinggi.
Target industry: Iron and steel industry/Metal material Energy Electricity/Gas/Water
-
High Speed Circular Saw Machine for Pipe “CS-75P”
- Catalogue
『CS-75P』 is a high-speed circular saw machine for the hollow section, which can shorten the cycle time for cutting the hollow section with the latest technology optimized for the high-precision cutting. By combining with an optional automatic loader, a deburring device, etc., to be incorporated into a product line. [Features] ■The single vise mechanism achieves faster moving speed ■High-rigid frame ■The circular saw slides obliquely ■Ecological Clean-mist method cooling system ■Reduction of oil adhesion results in easier maintenance and easier workpiece handling in following process ■AC servomotor control and ball screw for precise feeding and positioning. ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Filter Press Dehydrator "TFAP"
- Catalogue
- Distributor required
- Partnership required
TFAP is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake washing process is equipped as standard. TFAP is build-to-order, various capacity & specification can be applicable with automatic operation.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Filter Press Dehydrator "TFTP"
- Catalogue
- Distributor required
- Partnership required
TFTP type FILTER PRESS equips Double Hydraulic Cylinder and Shifting Block with automatic squeezing operation. Size & width of filter plates are selectable as per customer's requirements. Cake discharge can be carried out easily with 1 operator.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Filter Press Dehydrator "U-TEC"
- Catalogue
- Distributor required
- Partnership required
U-TEC is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake washing process is equipped as standard. U-TEC is cloth travel type automatic filter press with single filter cloth. All chambers open (close) at the same time during cake discharge process to save operation time.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Filter Press Dehydrator "AUTOPAC"
- Catalogue
- Distributor required
- Partnership required
AUTOPAC is a dehydrator to separate solid and liquid by filtration and squeezing. Dehydrated cake can be washed by AUTOPAC-PRO model. AUTOPAC is compact, ready-made, all-in-one type with automatic operation.
Target industry: Industrial Machinery/Devices Semiconductors/LCD/FPD Iron and steel industry/Metal material
-
Plate Drilling Machine(Standard Size) “ABP-1015G”
- Catalogue
- Distributor required
- Partnership required
“ABP-1015G” is a drilling machine which is suitable for the wide plate used for the parts of bridge and steel construction. We've increased the drilling torque so that the large diameter hole is drilled smoothly. Windows OS and 12.1 inch screen panel facilitate visibility and operability We have three products in accordance with the size of workpiece. ABP-1015G for 1000x1500mm workpiece, ABP-1530G for 1500x3000mm workpiece and ABP-1540G for 1500x4000mm workpiece. [Features] ■12.1 inch display on the control panel enhances operability ■Featured as standard ATC(Automatic Tool Changer)and automation tool length measurement system. ■From drilling to tapping by just one coordinate in the program ■Work Height Measurement Device(Optional Accessory) ■Equipped USB Port as External Interface ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
3 Axes Drilling and Circular Saw Cutting Combination Machine “CBF-3015II”
- Catalogue
- Distributor required
- Partnership required
"CBF-3015II" is a 3-axis drilling machine and circular saw cutting combination machine compatible with carbide tipped and HSS saw, cutting speed becomes twice faster. A new type of mission is adopted to ensure smooth machining. Automation sizing, Automatic gripper retraction and larger display monitor contribute reducing total machining time. [Features] ■High speed and high precision circular saw machining ■Both Carbide tipped saw and HSS saw compatible. ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Circular Saw Machine with Carbide Tipped Saw and HSS Saw “CHL-2515AII”
- Catalogue
- Distributor required
- Partnership required
“CHL-2515AII” is a circular saw machine. The cutting section adopts a lateral slide(from lower side face)&down cut mechanism, which can reduce influences of chips in cutting a hollow section. We have upgraded the structure of the mission gear and the driving system of the circular saw, which contributes to the reduction of the backlash and the improvement of the machining speed. This machine is capable of machining the hollow section(Thickness 12mm) with high precision. [Features] ■Both Carbide Tipped Saw and HSS Saw compatible ■Machining a wide range of steels ■Semi-dry cutting system significantly reduces wetting of workpiece ■High-speed and High-precision machining ■Simple and easy operation ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Multi-Purpose Hydraulic Press Machine “Unit Worker Series UWD-45IIS”
- Catalogue
- Distributor required
- Partnership required
“Unit Worker Series UWD-45IIS” is truly multi-purpose, which executes cutting, punching and notching with high precision and high speed for angle bar, channel steel, C-shaped steel and flat bar. A variety of machining with TAKEDA's Unit Die. [Unit Worker Series] 1.[UWD-45IIS], compact body enables a smooth layout at the factory and the pressure tonnage is 450kN as a standard pressure force. 2.[UWD-70IIS], machining stainless steel with the pressure tonnage of 700kN. [Features] ■Multi-Function ■Precise machining ■Safety and easy Operation ■Flexibility ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Drilling Machine for Shaped Steel “3BA-700IV”
- Catalogue
- Distributor required
- Partnership required
“3BA-700IV” is an automatic drilling machine with 3-axis for shaped steel Just enter the drill data, no need to adjust each dog for measuring the stroke. By detecting and correcting the inclination on the web and error on the flange, no extra correction at the assembly site is required. [Features] ■Three selectable origin point of Left, Right and Center enables quick symmetric machining ■Interactive CNC input for novice to expert ■Laser pointing for the symmetric machining with material locked. ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BA-700C”catalog is available.)
Target industry: Iron and steel industry/Metal material
-
Automatic Drilling Machine for H Beam “3BF-1050III”
- Catalogue
- Distributor required
- Partnership required
“3BF-1050III” is an automatic drilling machine for H Beam, Work material sizes are from 150mm x 75mm to 1,000mm x 500mm. Double Grip Method is used as a gripper for precise feeding and positioning the material.(Japan Patent No. 2050597/2087609) Two feeding grips, which absorb the warp and bend of the material, are equipped on the machine. [Features] ■Compact designed and Minimized foot print ■The clean mist cooling system reduces wetting of the work materials ■Automatic laser detector finds the edge of the material on loading ■Loadable short materials such as joint parts ■Easy operation with an interactive CNC ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BF-1050C”catalog is available.)
Target industry: Iron and steel industry/Metal material
-
3-Axis Drilling and Circular Saw Cutting(Carbide Tipped Saw) Combination Machine “CBF-4020W”
- Catalogue
- Distributor required
- Partnership required
“CBF-4020W” is a 3-axis drilling and circular saw cutting combination machine with a carbide tipped saw, which realizes a fully automatic machining, precise feeding, drilling and circular saw cutting of H beam(Width 400mm), square hollow(200mm) and angle bar with high speed. Total machining time is reduced by automatic sizing, automatic gripper retraction. [Features] ■High speed and high precision circular saw machining ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ■Simultaneous drilling with 3-axis (Marking also capable) ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Circular Saw Machine for Flat Plate “CHT-4008A”
- Catalogue
- Distributor required
- Partnership required
“CHT-4008A” is a circular saw machine with a carbide tipped saw for the flat plate. High precision and high-speed cutting are achieved, which dramatically improves the productivity of cutting the flat plate materials. Automatic sizing gripper feeds and positions the material(Tolerance 0.1mm). Precise and high-speed cutting generate virtually no burr and eliminate the bend and oblique result. [Features] ■High-speed, high precision cutting ■Changing circular saw is quick and easy ■Simple input and easy operation ■Optimizes cutting condition depending on the material steel grade. ■The clean-mist semi-dry cutting system reduces wetting of workpiece ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Automatic burr remover works on both sides of plate"PS-650W"
- Catalogue
- Distributor required
- Partnership required
"PS-650W"automatically grinds the drilled burr on both sides of splice plate. Rubber pads are used as pressure pads, Wide grinding belts work only on the burrs and don't affect the marking on the plate. Upper and lower grinding belt are at the same position, which can grind the burrs on both sides of the plate at the same time and double the productivity. Tracking device, which automatically corrects the inclination of the belt, preventing damaging on the belt. [Features] ■Set the thickness of the plate by just pressing the button switch then operate ■Wide grinding belts automatically work on the burr on both side of the plate ■Faster grinding speed improves productivity ■Special made rubber pad ensures precise finish ■Dust collector keeps the working environment clean ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Hydraulic Press Machine with Edge Notching for Sheet Metal “TCN-256B”
- Catalogue
- Distributor required
- Partnership required
"TCN-256B" is a hydraulic press machine with Edge notching, which has an independent scale of 45, 90 and 135 degrees on the left and right. The divisions on the scale have vernier scales, ensure the material to be precisely notched. Mounts TAKEDA's Unit Die Molds and it's capable of various machining by changing die molds. One-touch change of the die molds achieves superb availability. [Features] ■ Capable of corner shear up to 6mm thick 250x250 mm (SS400) ■ Dial rotation facilitates adjusting the clearance at the corner shear side. ■ Quick stroke adjustment by screws ■ Notching unit is replaceable ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Hydraulic Press Machine “UP-30B”
- Catalogue
- Distributor required
- Partnership required
"UP-30B" is a hydraulic press machine that is made for TAKEDA's Unit Die. Just put the alignment pin on TAKEDA's Unit Die(PRESET SERIES) into the pin hole on the table, and tighten the fixing bolt and ready to go. Mount a variety of TAKEDA's unit die open height is up to 400mm, by changing the punch head. To change the open height and shut height quickly by adjusting lever on the front face of the machine body, to fit the size of die. [Features] ■Designed to mount variety of TAKEDA's Unit Die(PRESET SERIES) ■Hydraulic Motor: Low Noise Type ■One-Touch open height and shut height adjustment ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Steel Surface Treatment Machine “Shot Blasting Machine Series”
- Catalogue
- Distributor required
- Partnership required
『Shot Blasting Machine SBF-450』 is a steel surface treatment machine for the plate(One face only), which automatically clean the surface of the splice plate and gusset plate. The design of the machine is compact and it's possible to install this machine in a corner of the factory. 『Shot Blasting Machine Series』 also have [SBF-510], a surface treatment machine for both sides of the plate, and [SBH-950E], s surface treatment machine for H beam. [Features of SBF-450] ■ Foundation work isn't required ■ Steel grit can completely be recycled ■ Dust collector enhances the working environment ■ Easy to change the impeller blade ■ An impeller is connected directly to the motor ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
"PRESET SERIES" Unit Die for Press Machine
- Catalogue
- Distributor required
- Partnership required
"Unit die"PRESET SERIES" for Press machine comprehensive catalog" is a general catalog of Takeda Machinery Co., Ltd., which develops, manufactures and sells metal working machines (Shaped steel drilling, circular saw machines and Punching die) Contents are "Punch series" die for applications such as flat plate processing, thick plate processing, small parts proximity punching holes etc., and "Shaped-steel processing series" such as for angle cut, flat bar cut, V notch etc. [Contents] ■ Punch series ■ Shape steel processing series ※ Please kindly refer to the catalog or feel free to contact us for more details.
Target industry: Iron and steel industry/Metal material
-
Life tool for steel “San Cramp”
- Catalogue
- Distributor required
- Partnership required
It's used in the factory and it's connected to overhead traveling cranes.I'llmove steel and it's a carried tool.
Target industry: Iron and steel industry/Metal material Metallic Products/Parts Transportation/Logistic/Warehouse
-
Fog + fan cooling unit “COOLJetter”
- Catalogue
The COOLJetter is an air cooling unit which blows Semi Dry Fog® with a droplet size of 20 ~ 30μm for reducing temperatures, cooling objects, suppressing dust/dirt, deodorizing, creating special effects, etc.
Target industry: Automotive/Transport Machinery Machine Parts Iron and steel industry/Metal material
-
“LYOHM system” – air cooling system using non-wetting semi dry fog
- Catalogue
The LYOHM System is an air cooling system using Semi Dry Fog®. This cooling system uses non-wetting Semi Dry Fog® with a droplet size of 20 ~ 30μm. By reducing the droplet surface area, contact between water and air becomes bigger and spaces can be cooled effectively with less water compared to simple sprinkling. Without wetting the body, the surrounding temperature drops by 3~5 °C. Ideal for outdoor or large spaces which are not suitable for general air-conditioning or to create cool spots.
Target industry: Automotive/Transport Machinery Machine Parts Iron and steel industry/Metal material
-
Heat Exchanger
Due to integrated system of heat exchanger design and manufacturing, and a variety of high frequency resistance welded fintube, we can supply optimized and high quality heat exchangers in accordance to customer's request. <Product Lineup> Economizer, Steam Air Heater, Super Heater, Gas Cooler, Air Fin Cooler, Hot Water Generater, Tank Heater and more
Target industry: Energy Chemical Materials/Products Iron and steel industry/Metal material
-
High Frequency Resistance Welded Fintube
Daikure fintubes are manufactured by original production technology. The technology makes it possible to maintain our unsurpassed quality level, and to produce fintubes with various combinations of material. Due to these achievements, we are able to supply our quality fintubes to industrial plants to every country around the globe. <Material> Tube : Carbon steel, Stainless steel, Alloy steel, Cupronickel, Titanium and more Fin : Carbon steel, Stainless steel, Alloy steel, Aluminum, Copper, Titanium and more
Target industry: Energy Chemical Materials/Products Iron and steel industry/Metal material
-
U Super High-Head Series
- Catalogue
Super high head dewatering is possible by one unit. The highest head is 200m. Pump structure is simple, ensuring easy maintenance.
Target industry: Construction/Mining Machinery Iron and steel industry/Metal material Other
-
Submersible Stainless Steel Pump
- Catalogue
Target industry: Iron and steel industry/Metal material Chemical Materials/Products Other Manufacturing
-
Hose Coupling Connector
- Catalogue
The Apollo coupling have been designed to provide quick set up and removal of cutting and welding equipment. A simple safety lock assures secure connection during use. Also the precisely machined single push system easily connects matching couplings with a click. The automatic gas plug gives you easy control when you need it and shuts off automatically when plug is removed. KOIKE Apollo couplings fulfill the international standard ISO 7289 and could be used worldwide.
Target industry: Iron and steel industry/Metal material Construction/Mining Machinery Agricultural Machines
All From 103 1 - 80 items are displayed