Japan Products and services

Plate Drilling Machine(Standard Size) “ABP-1015G”

“ABP-1015G” is a drilling machine which is suitable for the wide plate used for the parts of bridge and steel construction. We've increased the drilling torque so that the large diameter hole is drilled smoothly. Windows OS and 12.1 inch screen panel facilitate visibility and operability We have three products in accordance with the size of workpiece. ABP-1015G for 1000x1500mm workpiece, ABP-1530G for 1500x3000mm workpiece and ABP-1540G for 1500x4000mm workpiece. [Features] ■12.1 inch display on the control panel enhances operability ■Featured as standard ATC(Automatic Tool Changer)and automation tool length measurement system. ■From drilling to tapping by just one coordinate in the program ■Work Height Measurement Device(Optional Accessory) ■Equipped USB Port as External Interface ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

3 Axes Drilling and Circular Saw Cutting Combination Machine “CBF-3015II”

"CBF-3015II" is a 3-axis drilling machine and circular saw cutting combination machine compatible with carbide tipped and HSS saw, cutting speed becomes twice faster. A new type of mission is adopted to ensure smooth machining. Automation sizing, Automatic gripper retraction and larger display monitor contribute reducing total machining time. [Features] ■High speed and high precision circular saw machining ■Both Carbide tipped saw and HSS saw compatible. ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Circular Saw Machine with Carbide Tipped Saw and HSS Saw “CHL-2515AII”

“CHL-2515AII” is a circular saw machine. The cutting section adopts a lateral slide(from lower side face)&down cut mechanism, which can reduce influences of chips in cutting a hollow section. We have upgraded the structure of the mission gear and the driving system of the circular saw, which contributes to the reduction of the backlash and the improvement of the machining speed. This machine is capable of machining the hollow section(Thickness 12mm) with high precision. [Features] ■Both Carbide Tipped Saw and HSS Saw compatible ■Machining a wide range of steels ■Semi-dry cutting system significantly reduces wetting of workpiece ■High-speed and High-precision machining ■Simple and easy operation ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Multi-Purpose Hydraulic Press Machine “Unit Worker Series UWD-45IIS”

“Unit Worker Series UWD-45IIS” is truly multi-purpose, which executes cutting, punching and notching with high precision and high speed for angle bar, channel steel, C-shaped steel and flat bar. A variety of machining with TAKEDA's Unit Die. [Unit Worker Series] 1.[UWD-45IIS], compact body enables a smooth layout at the factory and the pressure tonnage is 450kN as a standard pressure force. 2.[UWD-70IIS], machining stainless steel with the pressure tonnage of 700kN. [Features] ■Multi-Function ■Precise machining ■Safety and easy Operation ■Flexibility ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Drilling Machine for Shaped Steel “3BA-700IV”

“3BA-700IV” is an automatic drilling machine with 3-axis for shaped steel Just enter the drill data, no need to adjust each dog for measuring the stroke. By detecting and correcting the inclination on the web and error on the flange, no extra correction at the assembly site is required. [Features] ■Three selectable origin point of Left, Right and Center enables quick symmetric machining ■Interactive CNC input for novice to expert ■Laser pointing for the symmetric machining with material locked. ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BA-700C”catalog is available.)

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Automatic Drilling Machine for H Beam “3BF-1050III”

“3BF-1050III” is an automatic drilling machine for H Beam, Work material sizes are from 150mm x 75mm to 1,000mm x 500mm. Double Grip Method is used as a gripper for precise feeding and positioning the material.(Japan Patent No. 2050597/2087609) Two feeding grips, which absorb the warp and bend of the material, are equipped on the machine. [Features] ■Compact designed and Minimized foot print ■The clean mist cooling system reduces wetting of the work materials ■Automatic laser detector finds the edge of the material on loading ■Loadable short materials such as joint parts ■Easy operation with an interactive CNC ※ Please kindly refer to the catalog or feel free to contact us for more details. (The previous model,“3BF-1050C”catalog is available.)

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

3-Axis Drilling and Circular Saw Cutting(Carbide Tipped Saw) Combination Machine “CBF-4020WI”

“CBF-4020WI” is a 3-axis drilling and circular saw cutting combination machine with a carbide tipped saw, which realizes a fully automatic machining, precise feeding, drilling and circular saw cutting of H beam(Width 400mm), square hollow(200mm) and angle bar with high speed. Total machining time is reduced by automatic sizing, automatic gripper retraction. [Features] ■High speed and high precision circular saw machining ■Machining a wide range of shaped-steel materials ■The clean-mist semi-dry cutting system reduces wetting of workpiece ■Prolonged service life of circular saw blade ■Simultaneous drilling with 3-axis (Marking also capable) ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Circular Saw Machine for Flat Plate “CHT-4008A”

“CHT-4008A” is a circular saw machine with a carbide tipped saw for the flat plate. High precision and high-speed cutting are achieved, which dramatically improves the productivity of cutting the flat plate materials. Automatic sizing gripper feeds and positions the material(Tolerance 0.1mm). Precise and high-speed cutting generate virtually no burr and eliminate the bend and oblique result. [Features] ■High-speed, high precision cutting ■Changing circular saw is quick and easy ■Simple input and easy operation ■Optimizes cutting condition depending on the material steel grade. ■The clean-mist semi-dry cutting system reduces wetting of workpiece ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Automatic burr remover works on both sides of plate"PS-650W"

"PS-650W"automatically grinds the drilled burr on both sides of splice plate. Rubber pads are used as pressure pads, Wide grinding belts work only on the burrs and don't affect the marking on the plate. Upper and lower grinding belt are at the same position, which can grind the burrs on both sides of the plate at the same time and double the productivity. Tracking device, which automatically corrects the inclination of the belt, preventing damaging on the belt. [Features] ■Set the thickness of the plate by just pressing the button switch then operate ■Wide grinding belts automatically work on the burr on both side of the plate ■Faster grinding speed improves productivity ■Special made rubber pad ensures precise finish ■Dust collector keeps the working environment clean ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Hydraulic Press Machine with Edge Notching for Sheet Metal “TCN-256B”

"TCN-256B" is a hydraulic press machine with Edge notching, which has an independent scale of 45, 90 and 135 degrees on the left and right. The divisions on the scale have vernier scales, ensure the material to be precisely notched. Mounts TAKEDA's Unit Die Molds and it's capable of various machining by changing die molds. One-touch change of the die molds achieves superb availability. [Features] ■ Capable of corner shear up to 6mm thick 250x250 mm (SS400) ■ Dial rotation facilitates adjusting the clearance at the corner shear side. ■ Quick stroke adjustment by screws ■ Notching unit is replaceable ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Hydraulic Press Machine “UP-30B”

"UP-30B" is a hydraulic press machine that is made for TAKEDA's Unit Die. Just put the alignment pin on TAKEDA's Unit Die(PRESET SERIES) into the pin hole on the table, and tighten the fixing bolt and ready to go. Mount a variety of TAKEDA's unit die open height is up to 400mm, by changing the punch head. To change the open height and shut height quickly by adjusting lever on the front face of the machine body, to fit the size of die. [Features] ■Designed to mount variety of TAKEDA's Unit Die(PRESET SERIES) ■Hydraulic Motor: Low Noise Type ■One-Touch open height and shut height adjustment ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Steel Surface Treatment Machine “Shot Blasting Machine Series”

『Shot Blasting Machine SBF-450』 is a steel surface treatment machine for the plate(One face only), which automatically clean the surface of the splice plate and gusset plate. The design of the machine is compact and it's possible to install this machine in a corner of the factory. 『Shot Blasting Machine Series』 also have [SBF-510], a surface treatment machine for both sides of the plate, and [SBH-950E], s surface treatment machine for H beam. [Features of SBF-450] ■ Foundation work isn't required ■ Steel grit can completely be recycled ■ Dust collector enhances the working environment ■ Easy to change the impeller blade ■ An impeller is connected directly to the motor ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

High Speed Circular Saw Machine for Pipe/Hollow “CSHP-75A/100A/150A”

『CSHP-75A/100A/150A』 is a high-speed circular saw machine for the hollow section, which can shorten the cycle time for cutting the hollow section with the latest technology optimized for the high-precision cutting. By combining with an optional automatic loader, a deburring device, etc., to be incorporated into a product line. [Features] ■The single vise mechanism achieves faster moving speed ■High-rigid frame ■The circular saw slides obliquely ■Ecological Clean-mist method cooling system ■Reduction of oil adhesion results in easier maintenance and easier workpiece handling in following process ■AC servomotor control and ball screw for precise feeding and positioning. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

"PRESET SERIES" Unit Die for Press Machine

"Unit die"PRESET SERIES" for Press machine comprehensive catalog" is a general catalog of Takeda Machinery Co., Ltd., which develops, manufactures and sells metal working machines (Shaped steel drilling, circular saw machines and Punching die) Contents are "Punch series" die for applications such as flat plate processing, thick plate processing, small parts proximity punching holes etc., and "Shaped-steel processing series" such as for angle cut, flat bar cut, V notch etc. [Contents] ■ Punch series ■ Shape steel processing series ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Iron and steel industry/Metal material

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

High precision cutting at free angle “CM-1010KKS”

Cutting angle freely set on swivel table (within +-60 degrees range) Automatic deceleration at the start of cutting and at the end of cutting realizes a long service life of the saw blade Cutting of angle steel, channel steel as well as square pipes is also capable Combined with autoloader, Capable of corresponding to mass production machining Easy operation just by inputting angle and dimension with the touch panel [Features] ■ High precision cutting at free angle ■ Even Trapezoidal shaped product can be cut without changing the setup ■ Secure a safe and clean work environment by adopting full cover ※ Please kindly refer to the catalog or feel free to contact us for more details.

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Changes Four tools automatically 「CBF-3015Ⅱ-ATC」

1.The ATC device reduces tool change setup time. 2.The automatic sizing device performs processing positioning,reducing machining time needed. 3.The gripper for feeding material features an automatic retraction function. 【Features】 ・Equipped Automatic tool changer. ・Enable stable machining by adopting servo motor and ball screw for the feed axis. ・Compatible with carbide-tipped blades and high-speed steel blades ・Delivers more efficiency with optional Loader and Unloader. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Automotive Parts

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Dramatically reduced machining time「UWF-150Ⅲ」

【Features】 ・Punching with two different diameters in a single process.(With Punch part expansion option) ・Intuitive large 12.1 inch touch screen. ・Changing unit-type dies is easy and rapid. ※ Please kindly refer to the catalog or feel free to contact us for more details.

Target industry: Other Manufacturing

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

Drilling Machine for Shaped Steel with Automatic Measurement『3BF-1050III-RG』

Programming, Centering and Drill Speed Setting are Automatic! Increased efficiency with fully automatic functions! This is a drilling machine for shaped steel with automatic measurement that will drill holes in H-Beam in sizes (width × height) from 150 mm × 75 mm to 1,000 mm × 500 mm, square pipes of up to 500 mm sq., channel steel of up to 380 mm, and angle bar of up to 250 mm.

TAKEDA MACHINERY CO., LTD.

• View details
• Catalogue

QCM TRIAL KIT

The “QCM TRIAL KIT” that can detect and measure trace amount of mass yet produced with lowered cost is now for sale. A product that integrates together sensor element, frequency counter and device software, designed to operate with just a computer. By rendering the compact and portable “QCM TRIAL KIT” the ability to utilise 3 sensor elements simultaneously and calculate the average measured result, the device evolves into “TQCM”. ※Please follow the links below for further information and feel free to inquire

Target industry: Measurement/Analytical Instruments

PIEZO PARTS CO., Ltd.

• View details
• Catalogue

Temperature-compensated pressure switches

We offer temperature-compensated pressure switches. It compensates SF6 gas pressure using a bimetallic strip to maintain the rated pressures. This temperature-compensated structure correctly detects pressure loss caused by SF6 gas leakage. For both indoor and outdoor use with excellent weather resistance. [Features] • Automatic pressure adjustment caused by temperature changes • Shock, vibration and pulsation resistant • Long life with no maintenance required • Reliable quality based on our own technologies, made entirely in Japan * For details please download our PDF documents or contact us.

Target industry: Industrial Electrical/Control Equipment

Shinagawa Sokki Manufacturing Co.,Ltd.

• View details
• Catalogue

Magnetic gearless anti-vibration pressure gauges, the "MGG Model"

The “MGG Model” is a magnetic, gearless anti-vibration pressure gauge, offering excellent weather resistance, ideal for outdoor use. Free from leakage, thanks to its dry-spec anti-vibration design. A safety blow-out disc comes standard. Dial diameters are available in φ100mm and φ150mm. [Features] • Long life with magnetic gearless anti-vibration structure (patent granted) • Dry-spec anti-vibration design, free from leakage • Robust screw-lid aluminum die-cast case • Weather-resistant, ideal for outdoor use • Accuracy grade of 1.6% (standard spec), 1.0% (optional spec) * For details please download our PDF documents or contact us.

Target industry: Measurement/Analytical Instruments

Shinagawa Sokki Manufacturing Co.,Ltd.

• View details
• Catalogue

Eco Fleece

"ECO FLEECE is a wallpaper made from fleece (non-woven fabric) and pulp, and it is painted with water- based paint process in the factory. Since it is plasticizer-free, it is extremely safe, and it is also excellent for installations. Also, It does not gather dust because it is not a conductor that attracts static."

Target industry: Construction Trading/Distribution

Nagai.Co.,ltd.

• View details
• Catalogue

VCC-2CXP6M (B/W) / VCC-2CXP6R (Color)

The enclosure of VCC-2CXP6 is 29x29x55mm small footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 239fps at CXP-6 (8bit) output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI (vertical direction only), 2x2 binning (B/W model), defective pixel correction, white balance, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Industrial Machinery/Devices Measurement/Analytical Instruments

CIS Corporation

• View details
• Catalogue

VCC-SXCXP3ML (SXGA resolution, B/W camera featuring LED controller)

The enclosure of VCC-SXCXP3ML is 29 x 29 x 55mm footprint, and its compact size is suitable for embedded applications such as machine vision. With LED controller embedded, LED lighting can be directly connected to the camera and they can be powered and controlled via single BNC cable. Since this model enables to operate with less equipment, it contributes to space and cost efficiency. The camera is designed for CCS LED lightings. Also, it can transfer images at 168fps at CXP-3 output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI, sub-sampling, defective pixel correction, sequence control, shading correction, GenICam complied. etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Optical Equipment/Parts Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

VCC-SXCXP3M (B/W) / VCC-SXCXP3R (Color) / VCC-SXCXP3NIR (Near-infrared model)

The enclosure of VCC-SXCXP3 is 29mm cubic footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 168fps at CXP-3 output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as external trigger, ROI, sub-sampling, defective pixel correction, sequence control, shading correction, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. NIR (Near-infrared) model “VCC-SXCXP3NIR” is also available. With this model, images can be taken even if the target is at out of visual light range that cannot be inspected with human eyes or normal camera (ex. a candy in the opaque package). For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

J Series Wireline Rod & Casing

NLC produces J-Thread for Wireline Tools and Rods. “J” is from “J”apan. This thread is the same as and compatible with the world standard of “Q”. NLC has very original Master Gauge of the thread since NLC used to be Longyear Company.　NLC is the only one of the two manufacturers in the world who can produce genuine Wireline Rods and Tools.

Target industry: Mining Construction

NLC Co., Ltd.

• View details
• Catalogue

JGNL-20 Endless Drill

Designed and newly launced for automatic jet grouting construction, especially for cement column making. Twin Spindle Heads realize continuous drilling / pulling up a string and step-up jet grouting operations in one drill string in accordance with set program as required. This specific structure brings about more of productivity - reduction of time and labor in comparison with ordinary machines.

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details
• Catalogue

NL-500 Drill Rig

NL-500 Drill was developed in pursuit for Safety Control, Labor Saving and Cost Efficiency, having drilling capacity up to 550m for mineral exploration, soil investigation, etc.　Its head drive is Gear Drive that is strong and powerful (not chain drive).

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details
• Catalogue

NL-G80/NL-G80 II Drilling Rig

NL-G80 was developed as a cost efficient solution for users requiring a portable drill for shallow coring, Geo technical and Tri-cone rotary drilling applications.　 NL-G80Ⅱ- modified model with 2-step head gear for high speed coring – / NL-G80 with power-increased model are also offered. Features a Hydraulic Top Head drive, equipped with variable speed motor within the range of 50 to 800 rpm. With its 17 HP Diesel Engine, the drill is powerful, very reliable, and is highly productive with its 1.7 m feed stroke.

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details
• Catalogue

NL-26 Drilling Rig

NL-26 is a small-sized and light drilling machine equipped with Hydraulic Chuck with 6-step gearing system for precise drilling speed adjustment. This drill can be disassembled without oil leakage to be easily carried to mountainous sites (max. dissassembly weight : 60kg except a prime mover).

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details
• Catalogue

L-38-150 Drilling Rig "Megalo"

L-38-150 "Megalo" drill can handle large diameter Rod and Casing very properly through its big spindle head, having enjoyed high prestige in Japan over long years (more than 300 units in Japan). Has been also used in mineral explorations in foreign countries. L-Frame model is for larger diameter up to 900mm in water well drilling, etc. as an option.

Target industry: Construction/Mining Machinery Construction Mining

NLC Co., Ltd.

• View details
• Catalogue

L-38-98 High Speed Diamond Core Drilling Rig (for mineral exploration and soil investigation up to 565m)

L-38 High Speed Diamond Core Drill is well known model in the world, having high acceptance in mineral exploration throughout the global market, equipped with 8-step transmission, which enables a user to select proper working speed.

Target industry: Construction/Mining Machinery Construction

NLC Co., Ltd.

• View details
• Catalogue

NL-55 Drilling Rig (for multi purpose operations - exploration, soil investigation, water well, hot spring well, etc.)

Designed for greater depth up to 1,500m (N size) with larger spindle diameter of 145mm (142mm with Hyd. Chuck) for civil engineering works, mineral exploration, water wells, hot spring wells, geothermal investigation, etc. Having a high reputation, especially in the Asian market, NL-55 has been introduced and worked in large mining and drilling companies in a number of drilling operations.

Target industry: Construction/Mining Machinery Energy

NLC Co., Ltd.

• View details
• Catalogue

NL-700-V2 Core Drilling Rig (for mineral exploration and soil investigation)

NL-700-V2 Drill was developed in pursuit for Safety Control, Labor Saving, and Cost Efficiency. Capable of wireline N size (69.9mm) drilling up to 700m of deep hole drilling with high productivity.

Target industry: Mining Construction

NLC Co., Ltd.

• View details
• Catalogue

Bioethanol purification facility

HDS™ was adopted in Japanese largest bioethanol plant. It has a proven record to be operated about six years without any trouble and replacement. [Future of Zeolite membranes(Ceramic tube)] ■Its structure is made of only ceramics including fitting parts. ■It is a simple tubular structure. ■It has high durability and reliability. ■It can be used in harsh environments such as high temperature and high pressure.

Target industry: Medical Supplies/Biotechnology Chemical Materials/Products Paper Making/Paper Products

Hitachi Zosen Corporation

• View details

『QCM TRIAL KIT』

Our QCM sensor is included in this Trial Kit. QCM stands for Quartz Crystal Microbalance and can detect a very small amount of adhered substance according to the changes in resonance frequency of of the quartz resonator. Compact size to carry easily. 【characteristics】 ■Making full use of the stable characteristics of quartz resonators ■Capable of sensing a very small amount of mass ■Just connect to your PC ■Portable size Feel free to contact us or check our catalogues for more information.

Target industry: Measurement/Analytical Instruments

PIEZO PARTS CO., Ltd.

• View details
• Catalogue

Polymer Auto Feeder

This unit stably supplies polymer flocculants and performs continuous dissolution in automatic operation. Since delivering the first product in 1979, we have received more than 7000 units mainly from wastewater treatment plants throughout the country. We are striving to deliver high quality products by accumulating abundant delivery results and accumulated technologies.

Target industry: Electricity/Gas/Water Industrial Machinery/Devices Industrial Electrical/Control Equipment

KOYO ENGINEERING CO.,LTD

• View details
• Catalogue

EYE Cure Light

EYE Cure Light is a comprehensive UV curing system desinghed to irradiate a workpeice with UV energy efficiently.

Target industry: Semiconductors/LCD/FPD Automotive Parts Electrical/Electronic Parts

EYE GRAPHICS Co., Ltd.

• View details

VCC-VCL5 (VGA Resolution) / VCC-SXCL5 (SXGA Resolution)

VGA and SXGA resolution, Max. 578fps (VCC-VCL5/at 3tap VGA output) and 136fps (VCC-SXGA5/at 3tap), high speed, 29mm cubic Camera Link camera utilizing SONY Pregius image sensor. Packed with versatile functions suitable for PCB inspection, AOI, PTP inspection, FPD inspection, small parts inspection, robot vision, drone, machine vision, etc. Please refer to “Products and service features” section in this page or our product catalog for the details on camera specifications.

Target industry: Semiconductors/LCD/FPD Measurement/Analytical Instruments Industrial Machinery/Devices

CIS Corporation

• View details
• Catalogue

Hose clamp “Crescent Clamp®”

Crescent Clamp® is a hose clamp developed with pride by Risshyo. We call it “Crescent” because it is designed to vary the band thickness along the circumference. With this specially engineered design, circularity in the clamp’s expansion is well maintained to even out the pressure imposed on the circumference (tightening force). This feature directly affects leak prevention capacity. In addition, as no slits are used to vary the band width to obtain similar results, this product delivers higher rates of band tension with the same width and thickness. Its leaf spring design brings better assembly workability, or cost effectiveness, and easier maintenance without requiring re-tightening. Currently, our clamp is widely used by major automotive manufacturers in Japan and Europe, as well as in other industries, such as residential facilities, agricultural machinery, electrical equipment, industrial machinery and more. With this product, we have provided the industry with premium technology over a long period of time. * For details, please download our PDF documents or feel free to contact us.

Target industry: Machine Parts

Risshyo Corp.

• View details
• Catalogue

[Contract manufacturing] Break hands

Founded more than 50 years ago, automotive part manufacturer Risshyo Corporation specializes in flat springs. We contract-manufacture the break hands of chainsaws for tree cutting. Mass-production has been speeding up in fields where standardized specifications can be applied, such as automotive part manufacturing. We also provide automotive interior part assemblies and do other contract manufacturing, which uses flat spring processing technology. [Specifications] Materials: SUS301-CSP, SUS304-CSP, bainite, etc. Thickness: 0.8 ~ 1.0mm * For details, please download our PDF documents or feel free to contact us.

Target industry: Other Manufacturing Industrial Machinery/Devices

Risshyo Corp.

• View details
• Catalogue

【Sales Agents Wanted】Small-scale Oil Flowmeter

The small-scale oil flowmeter is a volumetric flowmeter employing a gear-type rotor specifically designed for oil and which can be used for a wide range of measurements, for example in measuring engine oil or fuel oil for marine vessels and boilers. Furthermore, flowmeters specifically designed for measuring high-temperature fuel like ship fuel are available. ■Electronic Counting Unit 　Digital Display Totalizing counter, reset counter and momentary flow rate are alternatively displayed. Furthermore, it is possible to set the momentary flow rate at 1 hour or 1 minute intervals. 　Multifunctional Counting Unit Ramified Flow Rate Display, Forward/Reverse Detection, Self-diagnosis,Battery Consumption Alarm etc.

Target industry: Measurement/Analytical Instruments

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Pulse Sensor CCG Flowmeter

The pulse sensor CCG flowmeter is a volumetric flowmeter for measurements of microscopic quantities of various fluids like catalysts, additives, and perfumes. Being made of stainless steel, it also ensures superior corrosion resistance against special fluids. Intelligent counting unit is a standard equipment. ●Connection Size：1/2Ｂ ●Applicable Fluid：Water, Chemical Solutions, Foodstuff, 　 　　　　　　　　　 Chemical Fluids, Petroleum etc. ●Accuracy：±0.5％RD ●Flow Rate Range：2~300L/h ●Fluid Viscosity：5mPa·s or less ●Fluid Temperature：−10~80℃ ●Maximum Working Pressure：1.96MPa ●Materials：Main Body SCS14 / Rotor SUS316

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Vertical-type Non-fluctuation Flowmeter

The vertical-type non-fluctuation flowmeter is a volumetric flowmeter that directly measures the flow rate using two sets of 45º combination rotors. ○Low Vibration and Low Noise ○High Precision and Wide Range of Flow Rate ○Easy to Maintain ○Less Pressure Loss ○Enhanced Shaft Bearing’s Durability ‐‐ ●Connection Size: 6~12B ●Applicable Fluid：Crude oil, Petroleum Derivatives etc. ●Accuracy：± 0.5%RD or ± 0.2%RD ●Flow Rate Range : 8~1,500m3/h ●Fluid Viscosity：150 mPa·s or less ●Fluid Temperature：0~150℃ ●Maximum Working Pressure：2.45MPa ●Materials：Main Body SCPH2 　　　　Rotor AC7A or FC200 ●Available with Intelligent Counting Unit

Target industry: Industrial Electrical/Control Equipment

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Turbine Meter

The turbine meter is smaller and lighter than other flowmeters and it allows highly accurate measurement over a wide flow rate range. It is an iconic turbine meter that is adopted for a wide range of uses including the trading process control and process management in various field. 〇Being made of stainless steel, it has excellent corrosion resistance and it can be used with a wide range of liquids, including water, petroleum and chemical fluids. 〇Since the housing has a cylindrical shape which is highly resistant to pressure, it can also be used for measuring high pressure fluids. (Up to 343 MPa.) 〇Its compact structure ensures ease of use and maintenance. Specifications of Intelligent Indicator Unit Display: Integrated, Reset, Momentary Flow Rate, Temperature etc. Functions: Linearization, Temperature Correction, 　　　　 Coefficient Correction, Correction of Measuring Chamber’s Thermal Expansion etc. Output: Open Drain, Voltage Pulse, Current Pulse, Analog Output etc. Communication: Smart Communication Explosion-proof Design: Explosion-proof Structure(ExdⅡBT4)

Target industry: Industrial Electrical/Control Equipment

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Ultrasonic Vortex Flowmeter　PFA Series

Since the parts in contact with liquid are integrally molded in PFA resin with excellent corrosion resistance and there are no sealed parts or pocket parts other than the piping connecting parts, PFA series are ideal for measuring chemical fluids, corrosive fluids, ultrapure water and similar fluids. ●Connection Size: 3/8, 1/2, 3/4, 1B ●Applicable Fluid: Chemical Fluids, Corrosive Fluids, 　　　　　　　　　　　　Ultrapure Water etc. ●Accuracy: ±3％FS, ±3％RD ●Flow Rate Range: 0.3 ~150L/min ●Fluid Temperature: 0 ~ 100℃ ●Fluid Pressure: 0.5 ~ 1.0MPa

Target industry: Semiconductors/LCD/FPD Industrial Electrical/Control Equipment

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Ultrasonic Vortex Flowmeter　PPS Resin Series

Since the parts in contact with liquid are integrally molded in PPS resin not containing glass and with excellent corrosion resistance and there are no sealed parts or pocket parts other than the pipe-connecting parts, PPS resin series are ideal for measuring chemical fluids, pure water incompatible with fluid contamination and similar fluids. ●Connection Size: 1/2, 3/4B ●Applicable Fluid: Water, Pure Water, Chemical Fluids Compatible with PPS resin etc. ●Accuracy: ±3％FS ●Flow Rate Range: 3.0 ~ 120 L/min (in case of water) ●Fluid Temperature: 0 ~ 50℃ ●Fluid Pressure: 1.0MPa ●Connection Method: Union Fitting (TS type)

Target industry: Semiconductors/LCD/FPD

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Ultrasonic Vortex Flowmeter　PEEK Resin Series

Since the parts in contact with liquid are integrally molded in PEEK resin with excellent corrosion resistance and have a completely pocketless structure, PEEK resin series are ideal for measuring ultrapure water, chemical fluids and similar fluids. ●Connection Size： 1/2, 1B ●Applicable Fluid： Chemical Fluids, Corrosive Fluids, Ultrapure Water etc. ●Accuracy: ± 3% RD (± 1% RD is also possible) ●Flow Rate Range： 1.7 ~ 220L/min ●Fluid Temperature： 0 ~ 140℃ ●Fluid Pressure： 0.39 ~ 0.98MPa ●Connection Method： Screw Fitting, Wafer-style

Target industry: Semiconductors/LCD/FPD

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Ultrasonic Vortex Flowmeter　SUS Series

The vortex signal is detected with high accuracy by ultrasonic wave, totalized flow rate and momentry flow rate are displayed on site and both analog output and pulse output are available. ●Connection Size: 1, 11/2, 2, 3, 4B ●Applicable Fluid：Liquids 　 (Excepting Liquids Incompatible with SUS316) ●Accuracy: ±1.0％RD（±0.5％RD） ●Flow Rate Range：0.6 ~ 20m3/h ●Fluid Temperature： 　−20 ~ 160℃(Waterproof Models) 　−20 ~ 120℃(Explosion-proof Models) ●Fluid Pressure：5.0MPa ●Piping Connection： Wafer Type, Flange Type

Target industry: Semiconductors/LCD/FPD

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Ultrasonic Gas Meter

The ultrasonic gas meter adopts a method based on measuring the difference in propagation time by alternately repeating transmission and reception with a pair of ultrasonic sensors as the time difference of ultrasonic waves varies with flow velocity; this allows for extreme accuracy of measurement and a wide range of flow rate. ○High Accuracy and Wide Range of Flow Rate （±1% RD, Flow Rate Range1: 40） ○Responds Quickly to Flow Rate Change ○No Moving Parts ○Explosion-proof Design ○Self-diagnostic Function ○Communication Function

Target industry: Electricity/Gas/Water

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Gas Meter

The gas meter is a volumetric flowmeter for gases which directly measures the flow rate by using two sets of rotors. Since the two sets of rotors rotate without making contact, it is hardly subject to accuracy due to equipment deterioration and can measure with high precision and over a wide flow volume range. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Wide Pressure Range and Less Pressure Loss ○Low Sensitivity Flow Rate ○Built-in Automatic Fueling Function

Target industry: Electricity/Gas/Water

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Turbine Gas Meter

The turbine gas meter, more compact and light than positive displacement gas meters, is a highly accurate gas meter which was designed for city gas measurements and is capable of measuring large volumes of gas. Furthermore, the counting unit is equipped with an electronic temperature/pressure compensator (ETPC), which calculates the temperature and pressure inside the tubes detected by each sensor and displays totalized flow rate of the gas converted into the reference state. ○High Accuracy and Wide Measurement Range ○Easy Maintenance and Inspections ○Enhanced Urability ○Compact Design

Target industry: Electricity/Gas/Water

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Emergency Shutoff Valve

The emergency shutoff valve (MBA series), thanks to using a carbon dioxide cartridge that generates a large initial torque on the driving source and employing a ball valve, is perfectly suited as safety and disaster prevention equipment for shutting off various types of pipelines in case of emergencies. ○Operated by Reliable Carbon Dioxide Cartridge ○No Auxiliary Equipment Required ○Either horizontal or vertical piping is available. ○Opening/closing can be performed manually a handle. ○Over 20,000 Units sold in Japan and Overseas

Target industry: Industrial Electrical/Control Equipment Industrial Machinery/Devices Electricity/Gas/Water

Tokico System Solutions, Ltd.

• View details
• Catalogue

【Sales Agents Wanted】Gasoline dispenser

Various series of products matching with gasoline station layout can be provided.All Made In Japan. ●Delivery Speed 　 Standard：40L/min High：70Ｌ/min Ultra High：180L/min ●All-In-One Pump Unit Pump & meter are directly connected while the other manufacturers have a separate structure. ●Error Messages Easy-to-understand error messages by accumulations of our experience and knowledge. ●Dual Filter in Pump Strainer and filter are equipped in the pump so that fuel is always clean. ●Dust and Water Proof High protection design for electric devices.

Target industry: Energy Industrial Electrical/Control Equipment Automotive/Transport Machinery

Tokico System Solutions, Ltd.

• View details
• Catalogue

VCC-VCXP5M (B/W) / VCC-VCXP5R (Color)

The enclosure of VCC-VCXP5 is 29 mm cubic footprint, and its compact size is suitable for embedded applications such as robot vision, drone installation, and machine vision. Also, it can transfer images at 523 fps at 8 bit output with global trigger shutter operation, so that it can capture objects on the production line such as PCB, foods, medicines and small parts clearly. Furthermore, the functions such as ROI, defective pixel correction, shading correction, Horizontal & Vertical flip, etc. are installed to make easier to see the region of the object you want to see, and contributing to higher inspection efficiency. For further information, please contact our sales division.

Target industry: Semiconductors/LCD/FPD Industrial Machinery/Devices Precision Equipment

CIS Corporation

• View details
• Catalogue

Poolmain

To be cleaner your swimming pool water

Target industry: Chemical Materials/Products Food Service/Hotel Trading/Distribution

Shinnihon Kasei Co.,Ltd

• View details
• Catalogue

CAD System SDS-ONE APEX3

SHIMA SEIKI'S SDS-ONE APEX3 apparel CAD system features New PGM software and provides smooth and efficient workflow from patternmaking, grading and marking to cutting. Highly efficient "Automarking Premium" nesting software and barcode generation are available as well. SDS-ONE APEX3 combines a full array of expert functions with easy-to-use instinctive operation, allowing anyone—beginners and professionals alike—to take full advantage of cutting-edge CAD technology. The familiar SDS operating environment consists of a pressure-sensitive cordless pen and digitizer tablet as well as a trackball unit with duplicate keys for often-used functions, allowing simultaneous use of both hands for maximum productivity. In addition, SDS-ONE APEX3 features such useful functions as online help, macro functions and seamless switching between PGM software programs. Combining proprietary SHIMA SEIKI technology with the benefits of a user-friendly environment, SDS-ONE APEX3 is the perfect workstation for apparel production, as well as for such industries as automotive, workwear, industrial material, container bag, flexible container bags, cloth container, carbon fiber fabric, carbon cloth, aramid fiber, woven fabric, tent, canvas, nonwoven fabric, filter felt and furniture.

Target industry: Automotive/Transport Machinery Garments/Textiles Other Manufacturing

SHIMA SEIKI MFG.,LTD.

• View details
• Catalogue

NC cutting machine P-CAM100C/120C/160C/180C

SHIMA SEIKI’s new P-CAM100C, P-CAM120C, P-CAM160C, and P-CAM180C NC cutting machine (computerized cutting machine) are ideal for cutting sheets of Carbon- and Glass-Fiber Reinforced Plastic (CFRP and GFRP) pre-impregnated composites (prepregs). In addition to conventional drag knife and reciprocating knife, ultrasonic knife can also be selected, allowing cutting of a wide range of materials such as rubber, leather, vinyl, thermoplastics, adhesive materials and water-repellent fabrics up to 20mm in thickness and in multi-ply applications. Cutting depth and height are automatically adjusted to aid in longevity of the blade. Furthermore various measures are taken in consideration of the type of materials to be cut on this machine, such as dust prevention, auto knife cleaning and cutting mat laydown. Double-cut prevention function and special cutting brushes are standard. Cutting length begins at a compact 880mm, while the cutting area can be customized for long items. By using the optional barcode scanner, operation accuracy and efficiency is increased significantly by preventing mistakes upon pattern data input. Machine installation can be performed in one-piece or in separate sections for smaller spaces. Together with SHIMA SEIKI’s SDS-ONE APEX3 CAD system, P-CAM100C, P-CAM120C, P-CAM160C, and P-CAM180C provide smooth and efficient computer-to-cutting for a variety of industries from automotive and aerospace to industrial materials.

Target industry: Automotive/Transport Machinery Aerospace Related Garments/Textiles

SHIMA SEIKI MFG.,LTD.

• View details
• Catalogue

NC cutting machine P-CAM130C/160C

SHIMA SEIKI's P-CAM130C and P-CAM160C NC cutting machine (computerized cutting machine) is ideal for cutting rolls of Carbon- and Glass-Fiber Reinforced Plastic (CFRP and GFRP) pre-impregnated composites (prepregs). In addition to conventional drag knife and reciprocating knife, ultrasonic knife can also be selected, allowing cutting of a wide range of materials such as rubber, leather, vinyl, thermoplastics, adhesive materials and water-repellent material up to 20mm in thickness and in multi-ply applications. Cutting depth and height are automatically adjusted to aid in longevity of the blade. Furthermore various measures are taken in consideration of the type of materials to be cut on this machine, such as dust prevention, auto knife cleaning and double-cut prevention function. A conveyor system with special cutting brushes is used for the cutting table, allowing highly efficient production while delivering roll material. Pickup table and automatic labeling device are available as options. By using the optional barcode scanner, operation accuracy and efficiency is increased significantly by preventing mistakes upon pattern data input. Machine installation can be performed in one-piece or in separate sections for smaller spaces. Together with SHIMA SEIKI’s SDS-ONE APEX3 CAD system, P-CAM130C and P-CAM160C provides smooth and efficient computer-to-cutting for a variety of industries from automotive and aerospace to industrial materials.

Target industry: Automotive/Transport Machinery Garments/Textiles Consumer Products

SHIMA SEIKI MFG.,LTD.

• View details
• Catalogue

Multi-Ply Fabric Cutting Machines (NC cutting machine) P-CAM series

Having established a reputation for high-efficiency, productivity and quality, SHIMA SEIKI's P-CAM multi-ply computerized cutting machine (NC cutting machine) lineup has undergone further improvement. The new lineup features increased cutting-head clearance to enable easier loading of multi-ply fabric before suction. A renewed knife mechanism yields higher strength and durability. Available electrically controlled high-output turbofan and presser foot both contribute to stable cutting by fabric type. A new cutting head features lower vibration and noise for improving the work environment. A stiffer frame, one-touch drill attachment and revised controller position all enhance operability and ease of maintenance. The multi-ply computerized cutting machines (NC cutting machines) P-CAM machines are the perfect choice for flexible high-volume production in a new era of global apparel production, as well as for such other applications as workwear, sewing, knit manufacturing, automotive, industrial material, container bag, flexible container bag, cloth container, carbon fiber fabric, carbon cloth, aramid fiber, woven fabric, tent, canvas, nonwoven fabric, filter, felt, and furniture.

Target industry: Automotive/Transport Machinery Automotive Parts Garments/Textiles

SHIMA SEIKI MFG.,LTD.

• View details
• Catalogue

Single-Ply Cutting Machines P-CAM100/160/200

SHIMA SEIKI’s astonishingly quick and efficient single-ply cutting machines (NC cutting machine) are perfect for small- and minimum-lot jobs such as made-to-measure, samplemaking, supplemental production of popular items and educational applications. They offer a choice of cutting width: P-CAM100 features a cutting width of 100cm; P-CAM160 is 160cm wide; and new to the lineup, P-CAM200 is 200cm wide. Among the many advantages are their compact size and surprisingly large cutting area, not to mention smooth and quiet operation. Ultra-fast movement and a self-sharpening circular knife offer high cost-performance. And the new integrated control monitor features a touch-sensitive panel with scheduling functions to boost productivity. Maintenance conditions are greatly improved through reinforced components and better accessibility as well. The extremely fast and flexible P-CAM100, P-CAM160, and P-CAM200 are the perfect investment for a new era in apparel production, work clothes, sewing industry, knit manufacturer, tailor, SPA, industrial material, container bag, flexible container bag, cloth container, carbon fiber fabric, carbon cloth, aramid fiber, woven fabric, tent, canvas, nonwoven fabric, filter, felt, furniture related industry, and educational applications.

Target industry: Garments/Textiles Automotive/Transport Machinery Other Manufacturing

SHIMA SEIKI MFG.,LTD.

• View details
• Catalogue

Disinfectant and Deodorant Spray "Magic Water"

Disinfectant and Deodorant by hypochlorite acid

Target industry: Food Service/Hotel Service Industry

Shinnihon Kasei Co.,Ltd

• View details
• Catalogue

Industrial machine transport vehicle “4-axle dump loader”

Our “4-axle dump loader”-4-axle self loader- is a standard industrial machine transport vehicle equipped with a wide tread outrigger jack, which also works as guide frame, to raise up for loading. With various options for better efficiency, such as radio control unit, the chassis is welded to the deck to provide high rigidity and reliability. [Features] •　Equipped with a wide tread outrigger jack, which also works as a guide frame •　Raise up for loading •　Various options are available for better efficiency •　High rigidity and reliability * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Fujita Automobile Industry Co., Ltd. CORPORATE PROFILE

Since our establishment in 1950, we at Fujita Automobile Industry Co., Ltd. have manufactured and sold a wide variety of truck trays. We manufacture and deliver dump loaders, which have become the industrial standard for truck trays with loading ramps, super loaders, light super loaders, and more, throughout Japan. For any types of truck tray, please contact us. [Business Areas] Manufacture, sales and repair of truck trays and bodies of dump loaders and trailers that carry construction machines, and general cargo vehicles. * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Industrial machine transport vehicle “2-axle dump loader”

Our “2-axle dump loader”-2-axle self loader- is a standard industrial machine transport vehicle equipped with a wide tread outrigger jack, which also works as guide frame, to raise up for loading. With various options for better efficiency, such as radio control unit, the chassis is welded to the deck to provide high rigidity and reliability. [Features] •　Equipped with a wide tread outrigger jack, which also works as a guide frame •　Raise up for loading •　Various options are available for better efficiency •　High rigidity and reliability * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Industrial machine transport vehicle “3-axle dump loader”

Our “3-axle dump loader”-3-axle self loader- is a standard industrial machine transport vehicle equipped with a wide tread outrigger jack, which also works as guide frame, to raise up for loading. With various options for better efficiency, such as radio control unit, the chassis is welded to the deck to provide high rigidity and reliability. [Features] •　Equipped with a wide tread outrigger jack, which also works as a guide frame •　Raise up for loading •　Various options are available for better efficiency •　High rigidity and reliability * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Industrial machine transport vehicle “Super loader”

The “Super loader” is an industrial machine transport vehicle using a deck sliding mechanism with body inclination. Gentle vehicle inclination and deck’s direct touch movement greatly contribute to speedy, smooth loading work. By touching the end of the deck directly to the ground, it can load without loading ramps. This loader supports industrial machine transport in many different settings. [Features] •　Loading with low center of gravity •　Loading without loading ramps •　Can be used in a wide range of transport settings * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Industrial machine transport vehicle “Steel deck with crane”

The “Steel deck with crane” is a transport vehicle with a crane for various purposes. A variety of options are available: the “Loading ramp manual setting model” needs no hydraulic components, contributing to lighter vehicle weight, the “Automatic loading ramp model” reduces loading workload by setting the loading ramp automatically using a hydraulic drive. [Features] •　Has attached crane •　Selection of loading ramp types * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Selection of loading ramps for industrial machine transport vehicles

Fujita Automobile Industry offers a range of loading ramps for “Steel deck with crane” for dump loaders. The “Automatic loading ramp” reduces loading workload by setting the loading ramp automatically using a hydraulic drive, and the “Loading ramp manual setting” model is used by attaching it manually. Our “Automatic loading ramp” comes in three models: aluminum, steel and grabbing types. [Line-up] •　Automatic loading ramp (Aluminum, steel and grabbing types) •　Manual setting loading ramp * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Automotive/Transport Machinery Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Various equipment and accessories for industrial machine transport vehicles

Fujita Automobile Industry has a wide range of equipment and accessories for industrial machine transport vehicles. From straight-pull hydraulic-driven 4t winches for trailer goosenecks to embedding hooks, toolboxes, and various other equipment and accessories. [Line-up] •　Winches (for trailers/cab-overs) •　Central storage /left and right storage •　Work tops / work lights •　Sleepers & sticks •　Embedding hooks •　Toolboxes •　Aluminum-made drop-sides (inserted type) * For details, please contact us or download our PDF files.

Target industry: Automotive/Transport Machinery Transportation/Logistic/Warehouse Construction

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

“Custom truck tray service”

We design and manufacture customized truck trays individually. Including accessories for pole trucks, up and down transport vehicles; trailer accessories; truck bodies with canopies; cylinder, motorbike and wood transport trucks; medium-sized duty trucks; livestock transport trailers, etc. If you are working in transport rationalization, please feel free to contact us. [Our featured products] •　Light-weight “Dump loader’ with better loading efficiency •　Reliable “Super loader” with straight sliding deck •　Light-weight “Light super loader” with inclining sliding mechanism * For details, please contact us or download our PDF files.

Target industry: Transportation/Logistic/Warehouse Construction Forestry

Fujita Automobile Industry Co., Ltd.

• View details
• Catalogue

Digital Gauges SA Series Contact Type Displacement Sensors

These are high-accuracy contact-type displacement sensors that detect the absolute position of the spindle optically and output it with high resolution. In combination with the separately-sold SA Series controllers, these products serve as a length-measuring system. We have also provided new air purge specifications in which air is supplied to the body of the detector to increase its internal pressure, preventing intrusion of foreign matter from outside, which significantly improves its environmental resistance, and enabling use in harsh environments with exposure to highly-penetrating oils, coolants and cutting fluids.

Target industry: Automotive Parts Industrial Machinery/Devices Metallic Products/Parts

CITIZEN FINEDEVICE CO.,LTD.

• View details

Purification system for bio gas and natural gas

■It is compact design. ■Compared　with　conventional　separation　technology（e.g.adsorption and distillation process）, it can reduce the　energy-saving drastically. ■It is manufactured in-house from ceramic materials to film formation. ■It has various services such as EPC engineering of the whole plant and maintenance.

Target industry: Electricity/Gas/Water Energy Chemical Materials/Products

Hitachi Zosen Corporation

• View details

Refining of Hydrocarbons

We develop practical technologies of membrane separation process that separate and recover hydrogen, aromas, olefins, normal paraffins, etc. at high concentration from petroleum fractions and off-gas. ■ Olefin / paraffin separation: Even if the molecular weight is high, straight-chain hydrocarbon can be preferentially permeated. ■ Propane / propylene separation: Propylene selectively permeates to propane. It is possible to construct a hybrid process that make energy saving even possible if propylene concentration is low. ■ Isomer separation: By separating normal paraffins from raw materials (light naphtha) with a purity of 90% to 80% or more, increasing production of high value-added products (olefins and aromas) is expected.

Target industry: Chemical Materials/Products Medical Supplies/Biotechnology Woodworking/Wood Products

Hitachi Zosen Corporation

• View details

Zeolite Membrane Separation for solvent dehydration

Membrane separation system is an energy saving separation and purification　technology that has attracted attention in recent years. The Hitachi Zosen Membrane separation system is equipped with Zeolite membrane element, which is proprietary technology in our company. It can realize a significant reduction of energy consumption and a reduction of installation space compared with conventional methods, for example the distillation and adsorption of which technologies are separating and purifying the target components from various mixed fluids (liquids and gases). It can be expected to reducing running costs not only for new plants but also for retrofitting existing plants. In addition, it is excellent in heat resistance and chemical resistance. 【Application】 ◆You have an idea to regenerate alcohol used for solvent extraction. ◆You have an idea to remove water from azeotropic alcohol. ◆You have an idea to shift chemical equilibrium of esterification reaction by dehydration. ◆You have an idea to regenerate and recycle used cleaning fluid. ※Catalog which case studies are explained sent free. For more details, please contact us or download the PDF.

Hitachi Zosen Corporation

• View details

SBR-PRIME Roller Chain CF Series//SENQCIA CORPORATION

Custom formulated CF coating delivering ecological advancement and significant improvements in wear resistance. Built on the solid foundation of Senqcia Roller Chains original premium quality.

SENQCIA CORPORATION

• View details

Case Study: Automated filling process from manual by skillful operator

Customer request and problem Customer is now doing by manual filling with three-way valve on the circulation and scale. The ink comes from roll mill to pump hopper. 1. The valve is not good in cut-out and cans become dirty. 2. Less trained operator is very slow filling and more skillful worker is needed. 3. The pump is very noisy and working environment is also bad.

Target industry: Other Manufacturing

HEISHIN Ltd.

• View details
• Catalogue

Case Study: Battered chicken to supply automatically

Customer request and problem Currently fried chicken process is all done by manual like this. 1. To supply battered chicken from meat wagon to conveyor. 2. Align with chickens on the conveyor 3. Dipping the source 4. To adjust the temperature of fryer There are following problems, Operators can not follow the conveyor speed due to alignment work for chicken. The conveyer has to be stopped to adjust each time. If the input amount of chicken is not stable, temperature goes up and down. Then additional time is needed.

Target industry: Food/Beverage

HEISHIN Ltd.

• View details
• Catalogue

Case Study: Dosing strawberry source without any damage

Customer request and problem Customer would like to make a deluxe ice cream with strawberry source including cut flesh fruit which looks homemade mixed. The gear pump installed in the ice cream machine is very small that fruits become broken. Then mixing process of fruits and source is not possible after filling into cup. Therefore the new process should be inline mixing from ice cream machine to filling machine. 5mm cut fruits have to be chosen by big size pump. Due to small dosing, rotary lobe pump is not possible to transfer exactly due to discharge pressure and its back flow. Customer looks for the pump with small dosing capacity and no damage to strawberry.

Target industry: Food/Beverage Chemical Materials/Products

HEISHIN Ltd.

• View details
• Catalogue

Case study: Grated radish for stable filling and no dripping

Customer request and problem The operator has to adjust the valve to fill source all time. Since gated radish is by manual filling, filling accuracy is bad, conveyer and floor are dirty. 1. As filling source is dripping under the conveyer or floor, it is unsanitary and need a lot of time to clean up. 2. As filling volume is not stable, filling has to be more extra for safe side. 3. The valve of existing machine needs to learn in long time for training. 4. Overflowing source is recycling to use again, but not sure about freshness.

Target industry: Food/Beverage Chemical Materials/Products

HEISHIN Ltd.

• View details
• Catalogue