Industrial robot/Automation machine/Related apparatus |
|
---|
Newly designed SCARA robot THE600 is suitable for the assembly and inspection process of electronics equipment and automobile components where fast motion and precision is crucial. * Accurate movement trajectory, high speed operation and high load capacity are achieved at the same time. Maximum speed (axis one and axis two combined) is 8,017mm/sec and standard cycle time is at 0.3 seconds level (at 2 kg load). Maximum load is 12 kg. Allowable moment of inertia 0.25 (kg·m2 ). * A new model SCARA robot with thoroughly redesigned mechanism and control functions. * A new robot controller TS5000 Improvement in synchronized control and tracking precision by better servo performances. Improved communication performances,IoT-ready fast data communication. Faster control cycle (position control cycle is three times faster than the previous model) results in improved synchronized control and tracking precision. Real-time transmission of internal data is possible, by adopting a new CPU with high functionalities and high performance enhanced communication capabilities (Gigabit Ethernet.)
This robot is capable of cutting glass epoxy or standard FR-4 PCB equal to or less than 1.6 mm thickness while monitoring the router bit sharpness. This capability reduces faulty cutting situations.
Target industry: Consumer Electrical Appliances Automotive Parts Electrical/Electronic Parts
Customer request and problem Customer is now doing by manual filling with three-way valve on the circulation and scale. The ink comes from roll mill to pump hopper. 1. The valve is not good in cut-out and cans become dirty. 2. Less trained operator is very slow filling and more skillful worker is needed. 3. The pump is very noisy and working environment is also bad.
Target industry: Other Manufacturing
Customer request and problem Currently fried chicken process is all done by manual like this. 1. To supply battered chicken from meat wagon to conveyor. 2. Align with chickens on the conveyor 3. Dipping the source 4. To adjust the temperature of fryer There are following problems, Operators can not follow the conveyor speed due to alignment work for chicken. The conveyer has to be stopped to adjust each time. If the input amount of chicken is not stable, temperature goes up and down. Then additional time is needed.
Target industry: Food/Beverage
Customer request and problem Customer would like to make a deluxe ice cream with strawberry source including cut flesh fruit which looks homemade mixed. The gear pump installed in the ice cream machine is very small that fruits become broken. Then mixing process of fruits and source is not possible after filling into cup. Therefore the new process should be inline mixing from ice cream machine to filling machine. 5mm cut fruits have to be chosen by big size pump. Due to small dosing, rotary lobe pump is not possible to transfer exactly due to discharge pressure and its back flow. Customer looks for the pump with small dosing capacity and no damage to strawberry.
Target industry: Food/Beverage Chemical Materials/Products
Customer request and problem The operator has to adjust the valve to fill source all time. Since gated radish is by manual filling, filling accuracy is bad, conveyer and floor are dirty. 1. As filling source is dripping under the conveyer or floor, it is unsanitary and need a lot of time to clean up. 2. As filling volume is not stable, filling has to be more extra for safe side. 3. The valve of existing machine needs to learn in long time for training. 4. Overflowing source is recycling to use again, but not sure about freshness.
Target industry: Food/Beverage Chemical Materials/Products
Customer request and problem Customer has a production process to supply face cream from tank to filling machine. However the other existing pump cannot suck due to very high viscosity and operator is doing by manual with shovel, 1. There is a risk of foreign particles coming into tank due to open tank. 2. Due to manual, working place becomes dirty caused by leaking or dropping from shovel. Cleaning must be done after production every day. 3. It is very hard and unskilled job, so very tiring for operators.
Target industry: Chemical Materials/Products Scientific/Physics and Chemistry Instruments
Customer request and problem 1. To reduce working time from manual to automation. 2. The viscosity of imported tomato paste is not stable. So some level of viscosity should be no problem. 3. Customer wants to be only one working place to transfer multiple tanks.
Target industry: Food/Beverage
Progressive cavity (PC) pumps are used for conveyance of a wide variety of fluids, from watery to highly viscous. They can even be used with fluids containing solids or bubbles, and shear-sensitive fluids can be conveyed without causing damage. They provide non-pulsating conveyance at fixed flow rates, and are widely used at manufacturing sites, contributing to automation and labor-savings in fluid conveyance.
Target industry: Automotive/Transport Machinery Automotive Parts Semiconductors/LCD/FPD
Customer request and problem Now customer is doing by manual to supply high viscous ink to roll mill for the grinding and dispersion. This manual is so tiring that the operator becomes hand inflammation. The operator should take care upstream process, but only downstream is much enough.
Target industry: Other Manufacturing
Solution Customer uses conventional sanitary pump to transfer jam with fruits for heat exchanger. This process is required higher pressure to increase sterilization efficiency, however, valves cannot be used due to solid contents (fruits). In addition, CIP is not perfect. Then pump parts make contamination caused by fruits seed. So the whole system does not work well.
Target industry: Food/Beverage
Customer request and problem Currently, customer is mixing starch slurry in the open cooker by steam heating. But there are some problems such as risk of contamination by open mixing and mixing failure by very high viscosity(100Pa・s). Customer requests to stop butch production and improve continuous inline process with steam heating and cooling concentrate.
Target industry: Food/Beverage
Heishin Dispenser can apply higch viscou sealer quickly and acurately. This is used for automotive and car electronics. 【Application】 Liquid: Thermal grease Industry: Automotive, Electronic components 【Current problems】 Customer uese pneumatic dispenser, but 1. Dispense is not stable due to high vicoscity 2. Life time of pnematic dispenser is very short since thermal grease includes very abrasive metal particles. 3. Cyle time is logner due high viscosity and the production can not be short. 4. Wide-thickeness can not be applied. 【Solution】 All problems are clear by Heishin dispenser, ■No effect in high viscous thermal grease with Heishin Dispenser ■Propose suitable nozzle and needle for various type of application 【Customer benefit】 ■Cycle time can be reduced and prodoction is improved ■Dispense volume becomes stable and quality is improved ■One machine can work for many applications like dotting, bead line and wide-thickness.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
Heishin Dispenser can apply higch viscou sealer quickly and acurately. This is used for automotive and car electronics. 【Application】 Liquid: High grade grease Industry: Automotive, Electronic components 【Current problems】 Customer uese air-gun with plunger pump for high grade grease. Applications are three surfaces and filling to bearing. 1. Yield rate is very low due to unstable and inacurate dispense. 2. For three surfaces, it takes three times longer time for each dispense. 3. Internal surface in the tube is not possible by valve type dispenser. 【Solution】 All problems are clear by Heishin dispenser, ■Heishin Dispenser can apply high viscosity stably and acurately. ■Propose suitable nozzle and needle for various type of application ■For three surfaces and filling the bearing, split nozzle can reduce cycle time. 【Customer benefit】 ■Dispense accuracy becomes stable and quality is improved. ■Three different applications are available with changing three types of nozzle. ■Split nozzle can reduce cycle time and productivety is improved.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
Heishin Dispenser can control to apply very small amount like micro litter level. This is used for high viscous glue in electric industry. 【Application】 Liquid: High grade grease Industry: Electronic components 【Current problems】 Customer applies high viscous glue to the plastic case with 0.5mm bead line. Too much volume is over outcome and too little is poor sealing quality. However, exsiting pneumatic dispenser has problems like, 1. It takes time to change dispenser volume to adjust pressure by regulator. 2. Pulsation or little changing condition cause dispense volume that are unstable. 3. Dripping happens and it makes dirty other equipments. 【Solution】 All problems are clear by Heishin dispenser, ■Heishin Dispenser can apply high viscosity stably and acurately. ■Propose suitable nozzle and needle for various type of application ■For three surfaces and filling the bearing, split nozzle can reduce cycle time. 【Customer benefit】 ■Dispense accuracy becomes stable and quality is improved. ■Three different applications are available with changing three types of nozzle. ■Split nozzle can reduce cycle time and productivety is improved.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
Heishin Dispenser can control to apply very small amount like micro litter level. This is used for high viscous glue in electric industry. 【Application】 Liquid: Two-component epoxy glue Industry: Electronic components 【Current problems】 Customer applies two-comonent glue to electrical parts. However, exsiting pneumatic dispenser has problems like, 1. It takes time to apply due to high viscosity. 2. Ambient temperature effects on viscosity. So mixing is not well and gule does not cure. 3. Dripping happens. 【Solution and Customer benefit】 All problems are clear by Heishin dispenser, ■Heishin Dispenser can apply high viscosity quickly and acurately. So the cycle time becomes on half. ■Poor mixing is clear caused by high viscosity. ■Suck-back is available with servo motor and no dripping. It does not make jig dirty.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
Heishin Dispenser can control to apply very small amount like micro litter level. This is used for solder paste in electric industry. 【Application】 Liquid: Solder paste Industry: Electronic components 【Current problems】 Customer applies solder paste in large capacity production line. However, exsiting pneumatic dispenser has problems like, 1. Dispense volume goes down little by little in a few hours. 2. After low limit comes, operator has to stop the production line to adjust. 3. After adjusting, operator has to go next process and spend much time for all dispensers. 【Solution and Customer benefit】 All problems are clear by Heishin dispenser, ■Heishin Dispenser can apply very stably and product quality is improved. ■Customer can reduce down time and improve productively much better than before. ■Heishin dispenser is stable for volume more than 24 hours and workload can be reduced.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
We introduce Heishin Dispenser fpr applications of high viscosity and micro litter level. Heishin Dispenser HD is very stable dispense in case of changed viscosity or the rest of quantity in the barrel. So it can save many times of adjustment. Heishin Dispenser is based on progressive cavity pump. It is continous metering, high accuracy, stable dispense and applied shape. Then your product quality is improved. Heishin Dispenser is suitable for dam application, fill application and bond application. This is the solution for highly required accuracy in electrical, semicondcutor and solar battery industires. Please see the catalogue or contact Heishin.
Target industry: Automotive Parts Automotive/Transport Machinery Consumer Electrical Appliances
Never tires even after 24-hour high-cycle operations! The THP series is a high-speed, high-cycle SCARA robot that has achieved continuous extended operation at maximum speed. The THP series is available with arm lengths of 550mm and 700mm.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
The TH series offers SCARA robots with arm lengths of 180mm - 1200mm. Available from compact to large types, the TH series supports a wide range of applications. Options to assure compliance with cleanroom standards or water-and-dust proof requirements (IP65), ceiling mount, etc. are available. The TH series compact type is available with arm lengths of 180mm - 350mm.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
3 types of vertically articulated robots with arm lengths of 572 mm, 800mm and 1000mm, suitable for handling and assembly in cellar manufacturing systems. Standing in for human laborers, our TV series robots can be used in the manufacture of automobile or precision electronic components. Facilitates automation, labor savings and better productivity.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
A vertically articulated robot with an arm length of 500mm. Demonstrates high-productivity in assembly or transport in limited spaces. Provides first-class performance and great usability, with a variety of available options.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
The SCARA robot THL series large type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series large type is available with arm lengths of 800mm - 1000mm.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
The SCARA robot THL series was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series is available with arm lengths of 500mm - 700mm.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
The SCARA robot THL series compact type was developed bearing in mind the concepts of low cost, light weight and power savings. This globally strategic product targets Asian markets in particular and, to keep the price low, it focuses on features and performance designed to meet the needs of the global market. The THL series compact type is available with arm lengths of 300mm and 400mm.
Target industry: Automotive Parts Consumer Electrical Appliances Electrical/Electronic Parts
Ideal for arc welding with a simple and slim arm shape
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
High-speed, ergonomic and environmentally friendly
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
Compact & powerful
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
Achieves high-speed operation with a slim body.
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
Suitable for light-weight handling operations as well as various welding applications.
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
Accommodates various needs such as thick plate welding that requires high current and high usage rates.
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
For use in any welding and cutting applications.
Target industry: Automotive/Transport Machinery Automotive Parts Consumer Electrical Appliances
Highly functional ECO Dispenser. Cut power consumption by 50%! Dispense precision is improved, 130% compared to existing model. Equipped with set up function for dispense condition.
Target industry: Electrical/Electronic Parts Optical Equipment/Parts Precision Equipment
Our Σ series have been highly valued for their high-precision small-volume point dispensing capability and overwhelming accomplishments in automatized unmanned production lines. "Three Major Σ Functions" have solved difficult problems all together such as dripping, water head difference, and remaining volume alarm. These functions provide excellent performance, for example, ultra-precision dispensing of as little as 0.01mg and high-speed dispensing at minimum cycle time of 0.1sec. or less in various production processes including semiconductor manufacturing and electronic component manufacturing. Dispenser with full-function digital control, Super Σ®CMII, is now available, which has inherited the most-advanced performance and been substantially upgraded. Higher-precision and higher-stable dispensing has been successfully achieved thanks to further improvement in dispensing stability and remaining volume detection accuracy.
Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Precision Equipment
As it jets fluid material with fine precision on a workpiece from a separate position, it does not need to raise or lower the nozzle. It offers high precision and stable dispensing, as well as high-speed dispensing cycle. This is a newly developed dispenser that contributes to significant improvement of your production efficiency and affords difficult dispensing that could not be realized with conventional contact type dispensers.
Target industry: Automotive Parts Semiconductors/LCD/FPD Electrical/Electronic Parts
Simultaneous process "2-part fluid mixing and bubbles removing" by the rotation / revolution method
Target industry: Automotive Parts Semiconductors/LCD/FPD Electrical/Electronic Parts
All for high quality dispensing. Elimination of dispensing volume fluctuation. Excellent dispensing accuracy. MUSASHI’s original air pulse stabilization circuit provides shortened pressure rise time and rapid response, and it makes stable dispensing area broaden and eliminate dispensing volume fluctuation.
Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Precision Equipment
Ultra-precise dispensing available through the volume measuring type digital controlled plunger. Our volume measuring type digital controlled dispenser, MEASURING MASTER®, provides constant volume dispensing of variable-viscosity fluids.
Target industry: Automotive Parts Semiconductors/LCD/FPD Electrical/Electronic Parts
"Smart" 350PC renewd version, now available ! Smart 3-D alignment function equipped ! Complete alignment of pallet/work tilt 1) Space reduced by 30% Compact footprint achieved by smart design 2) Tact time reduced by 30% Our original smart 3-D technology equipped 3) Multi-language support Ready for Japanese, English, Chinese and Korean.
Target industry: Automotive Parts Semiconductors/LCD/FPD Electrical/Electronic Parts
Optimum for research and development, and small lot production of multiple types. Offers fine and quiet dispensing operation. Strong arm and high speed "application" master robot.
Target industry: Semiconductors/LCD/FPD Electrical/Electronic Parts Precision Equipment
Coating shape controllable at will. Best suited dispensing head mountable depending on applications. Spot coating with non-contact JET AEROJET Wide coating with spray CV-10
Target industry: Automotive Parts Semiconductors/LCD/FPD Precision Equipment