Resin/Plastic/Rubber Products Company

H. IKEUCHI & Co., Ltd.

Technical support and product distribution of spray nozzles for cleaning, cooling, temperature control; humidification systems using spray nozzles; air-cooling systems for factories; outdoor air-cooling systems; other cooling systems. Distribution of spray nozzles for high-pressure cleaning, chemical spraying, cooling gas, cooling steel, etc., and air nozzle “TAIFUJet.” Distribution of dry fog humidifier AKIMist® for humidification and Semi Dry Fog® cooling unit “COOLJetter.” Ikeuchi’s spray nozzles are ideal for dust prevention measures, air-cooling of huge spaces, blow-off drying and noise reduction. They are used in a wide variety of industries including the electronics, vehicle, chemical, food, textile, paper and agricultural fields.

View details

• Catalogue

HAGIHARA INDUSTRIES INC.

Manufacturing and sale of converting machinery such as Slitter rewinder, Inspection Rewinder and Plastic recycling machine.

View details

• Catalogue

SOMAX CO., LTD.

■ Development, manufacture and sales of mold cleaning machinery Let our mold cleaning machine, the "CLIPIKA ACE" handle any mold cleaning issues you might have. Even if molds are burnt by gas or resin is stuck to them, we can restore the original colors. Cleaning molds with our equipment not only reduces the number of defective products, but the number of mold shots is also considerably increased. Even if your equipment hasn’t been used for extended periods, cleaning with our system prevents it from rusting; thus, molding operation can be commenced immediately without cleanup. The time spent and amount of mold maintenance required will be reduced dramatically; therefore, inconsistency of maintenance among operators can be avoided. ■ Development, manufacture and sales of cleaning machines for mold cooling pipes Our cleaning machine for mold cooling pipes, the "Water Reamer", can dissolve and remove layers of impurities (scales) deposited by water and rust inside pipes, which results in bringing cooling efficiency back to normal levels. "Water Reamer" features; - By drying after cleaning, a primary rust preventive coating is formed. - No need to flush with water or do any neutralization after cleaning. - Allows maintenance of cooling water pipe interiors without degradation. * Please try our mold cleaning machine, the "CLIPIKA ACE" and our mold cooling pipe cleaner, the "Water Reamer".

View details

• Catalogue

SHOWA SHINKU CO., LTD.

Productions of total vacuum equipment and components for quartz devices, optical thin films, electronic devices, etc. Vacuum evaporation equipment / Sputter equipment /Ion plating equipment / Dry etching / Ashing equipment /Vacuum metallurgic equipment(for dissolution, heat-processing, sintering and degassing) / Optical monitor for thin films / IAD cold cathode ion source /Liquid crystal injection equipment / Organi LED element coater / etc.

View details

• Catalogue

IBS Inc.

Manufacture, import, sales and maintenance of fluid control equipment

View details

• Catalogue

NIKKA LIMITED

We manufacture general industrial equipment, products for commercial web offset printing, for sheet-fed printing and for newspaper printing, consumable supplies and much more.

View details

• Catalogue

OK-DEPOT

Development, manufacture and sales of natural building materials that contribute to environmental impact reduction, energy savings and maximizing occupants’ comfort and health.

View details

• Catalogue

Daido Kogyo Co.,ltd

○ Sales of a variety of industrial welding machines and welding equipment for automobile sheet metal repair ○ Sales of infrared burners and equipment for various furnace burners ○ Sales of industrial machine tools

View details

• Catalogue

Chukoh Chemical Industries, Ltd.

Highly functional plastic product manufacturing and process and sale including fluorocarbon polymers silicone resins

View details

• Catalogue

YAMAUCHI Corporation

For nearly a century since its foundation in 1918, Yamauchi has been contributing to society as a company that specializes in the manufacture of industrial rubber and plastic products. Today, Yamauchi supplies high-quality industrial parts to manufacturers of various products in diverse fields, such as audio and visual products, copy machines, printers, disk drives, papermaking machines and textile machines. In recent years, the company has begun developing a number of products that may well become global standards. To respond to a wide range of needs of manufacturers around the world, Yamauchi conducts dynamic business activities in collaboration with other Yamauchi Group Companies.

View details

• Catalogue

AION Co.,Ltd. Malaysia Regional Office

- Taking care of our existing customers - Collecting information on ASEAN industries - Participating in exhibitions - Following up on enquiries from ASEAN countries - Dealing with Japanese and local companies * Our Malaysia office is a regional representative office and not a corporation.

View details

• Catalogue

Konoshima Chemical Co.,Ltd.

1. Building materials Manufacture of ceramic-based exterior materials for houses, interior materials for buildings and houses, fireproofing protection plates, and fireproof panels for buildings 2. Chemicals Magnesium oxide, high-purity magnesium oxide, magnesium hydroxide, magnesium carbonate 3. Ceramics Development, manufacture and sales of high-quality and high-performance ceramics

View details

• Catalogue

SHIBATA INDUSTRIAL CO.,LTD.

・ Manufacture and sales of rubber products, synthetic resins, and other accessories. ・ Design, construction and maintenance works of civil engineering, building, pavements, installations, constructions, electricity, piping, steel structures, dredging, waterproofing, landscaping, plumbing, fire-fighting facilities, cleaning facilities. ・ Research and development, manufacture and sales of construction materials. ・ Manufacture and sales of concrete products. ・ Other works related to above.

View details

• Catalogue

Nikuni Co., Ltd.

- Vortex turbine pumps/seal-less pumps for LCDs, semiconductors and ultra-pure water - Centrifugal pumps, water ring vacuum pumps, three-barreled high pressure diaphragm pumps - Pump application devices/fine bubble generators, ozone water manufacturing equipment, liquid chemical dissolution equipment, industrial and medical vacuum systems, deoxygenation devices, coolant filtration systems, coolant anti-corrosion units - Electronic control units/water quality management devices, liquid injection control devices, multi-point color boundary sensors - Optical equipment, precision machined parts - Semiconductor manufacturing equipment - Precision components

View details

• Catalogue

HONDA ELECTRONICS CO., LTD. Bangkok Representative Office

Advertisement support of ultrasonic equipment, such as ultrasonic cleaners, ultrasonic level meters, and ultrasonic cutters

View details

• Catalogue

Suga Test Instruments Co.,Ltd.

Manufacturing and sales of environmental test instruments (weathering, corrosion, snowfall etc.) and optical properties measurement instruments.

View details

• Catalogue

Nippon Pneumatic Mfg. Co., Ltd

NPK is a global company which provides planning, development, design, manufacture, sales and after-sale service of our products. Our 3 main business areas are construction equipment, pneumatic equipment and chemical engineering equipment. When we at NPK develop new products, we work as a team, not only with our technical experts, but with all our departments involved, including sales, service and manufacturing, to exchange ideas openly and freely.

View details

• Catalogue

KUBOTA Corporation

(This is a information of Japan headquarter as our division doesn't have local corporation) Kubota has three business segment which is Farm & Industrial Machinery business, Water & Environment System business and Social Infrastructure business, and oversea sales make up over 50%. Farm & Industrial Machinery business which make up 70% of company revenue are enhancing operating base for agriculture machine, engine and construction machine business, and overseas sales make up over two third. Weighing Feeder for plastic powder and pellet, Pellet screening System in Social Infrastructure business are also expanding business in oversea. Kubota has a top share at Farm machinery market and Ductile Iron Pipe in Japan.

View details

• Catalogue

THINKY CORPORATION

1) Planetary Centrifugal Mixer Development, manufacturing, and sales of the products "THINKY MIXER" 2) Manufacturing and sales of medical devices and medical instruments and apparatus 3) Business related to application areas and technology utilizing mechanical devices described in the previous items.

View details

• Catalogue

Tsubakimoto Singapore Pte. Ltd.

Sales of various power transmission machine components and units such as; power transmission chains, conveyor chains, cable hose and cable carrier system, gear reducers, lockings, shaft couplings, and so on.

View details

• Catalogue

FUJILLOY MALAYSIA SDN. BHD

Sales and marketing activities regarding cemented carbide wear-resistant tools, high-precision dies and molding parts, copper-tungsten alloys, diamond tools and others.

View details

• Catalogue

KURABO INDUSTRIES LTD.

■ Electronics Business Manufacturing, Sales and Maintenance of INFORMATION SYSTEM EQUIPMENTS and INSPECTION AND MEASUREMENT SYSTEMS such as Color Dynamics, Production Control, CAD

View details

• Catalogue

TOYOX ASIA (THAILAND) CO.,LTD.

Manufacturing industrial pressure-resistance resin houses, couplings and its related products.

View details

• Catalogue

FUJITA INDUSTRY Co., Ltd.

Sales of inkjet film "SOLEITA D-MEDIA" With our motto, "Technology of Japan", we develop and sell innovative products of stable quality.

View details

• Catalogue