Power Hydro Chuck PHC gives our hydro chuck its reputation for high-precision and stable chucking as well as easy collet holding. It can be replaced by a collet holder, which has been used as the standard holder until now with various internal diameter sizes and a wide variety of processing uses.
Milling chuck yang memiliki kekerasan dan kekuatan genggam setingkat milling chuck pada umumnya ditambah desain langsing yang compact.
Our “R” Zero Holder CTZ for large diameters can easily, accurately and quickly adjust runout of cutting edges to zero using our original 4-point adjustment system, no matter where the maximum runout point is. Thus, it is suitable for finishing large- diameter reaming.
Our “R” ZERO Holder makes possible a stable hole diameter, better surface roughness and prolonged cutting tool life due to the “zero” adjustment of the cutting edge runout.
This is an interface to maximize cutting ability of multi-tasking machines. There are models for external/cutting-off, for external/end-facing, for end-facing, for boring bar and for drilling.
Holders suitable for drilling and reaming without interfering with work piece as well as 5-axis finishing end mill processing
This tool holder is treated with special rustproofing, including part of the taper.
Length-adjustable Drill Collet Holder can adjust the drill projection by manually rotating the guide ring. Protrusion can be adjusted while measuring the height, which allows easy setting of the target value.
This is a synchronized tapping chuck which is securely holding the tap shank with collet.