Power Supply ClassⅡ SPD type: MZSR-200JK*ARI Catalogue | Asia wide Manufacturing Business Platform in Singapore : TECH DIRECTORY Singapore

Asia wide Manufacturing Business Platform in Singapore

TECH DIRECTORY Singapore

Power Supply ClassⅡ SPD type: MZSR-200JK*ARI

Catalogue image

Products / Services information

  • Class Ⅱ Power Supply SPD Type “MZSR-**” Class Ⅱ Power Supply SPD Type “MZSR-**”
    • Catalogue

    These are SPD (surge protective device) that comply with IEC standards for induction lightning surge 8/20μs. These direct lightning protective products have the same kind of lightning protection performance that is required of protection level I (direct lightning surge 200kA), and are high performance devices that can be easily installed in areas that are prone to lightning strikes. We have a range of devices to protect against induction lightning, depending on the circuit configuration. We can also supply element type devices. ・ SmartSPD series Type: SMB(P)-「」 “Smart SPD series” have a replacement recommendation display function based on lightning surge measurements. They are plug-in type so the jack can be taken off from the body. They also have a replacement recommendation display function, a lightning surge count display function and a deterioration display function with a warning contact output. ・ SmartSPD series SmartSPD System  “Smart SPD series” have a replacement recommendation display function based on lightning surge measurements. By using with a monitor unit, they can also check lightning surge information and the condition of SPDs, and be monitored via LAN. ・ Type: MZSR-「」They are plug-in type so the jack can be taken off from the body and have a deterioration display function with a warning contact output. ・ Type: MZE-「」 Equipped with an LED Device deterioration facility, one device can service a 2-wire single phase system. ・ Type: PMZ-「」They are space saving design to be put inside devices and boards, and a single unit can provide protection across lines and grounds. They have a deterioration and defect display function by LED, and also a built-in isolation function to prevent overheating in the event of deterioration. ・ Type: MZCR-「」 The device is a plug in type that allows the jack and main unit to be separated. The device is also equipped with a deterioration display and warning contact output. ・ Type: MKY-「」Width is 50mm/75mm with deterioration display and alarm output

Company information

SANKOSHA Corporation SANKOSHA Corporation
  • Catalogue
  • Distributor required

Category

Pick-up

PAGE TOP